Question about Air Tools & Compressors

Open Question

I have a dewalt emglo compressor D55143 and it does not go over 75 psi. I've replaced the regulator but no matter how much I turn it.. it seems it wont go over 75psi

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1388 Answers

SOURCE: Manual for Emglo Air Mate Compressor

Manual for the similar dewalt model is at www.dewalt.com, click on parts & service icon, then enter D55151. Or try clicking here: http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/5135175-01,D55152,Elec.pdf This Dewalt compressor is one of many versions of the Old Emglo AM78 compressor. There are several other brands built with the exact same design such as the Senco line. For parts list of actual Am78hc4v go to mastertoolrepair.com. If you have questions or problems with this compressor please email, Good luck

Posted on Jan 28, 2009

Ad
  • 5631 Answers

SOURCE: DeWalt emglo compressor does not start

Call an air-conditioner repair service

Posted on Jul 22, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Compressor relief valve opens 150lbs on my d55141


That is the compressor's holding capacity 150psi. Therefore, the cut-out pressure has been reached. The safety valve opens to relieve the excessive psi. Compressor should come on at 120 psi.

May 15, 2012 | Dewalt d55151 factory reconditioned emglo...

1 Answer

Looking For A Parts Diagram For A Emglo LAG8HGA-8P--Trying To Find The Regulator--Not Like The Ones I See On Emglo's Parts List. This Is A All In One Unit The With The Air Gauges On Each Side Of The...


All you need is a 3/8" NPT regulator. DeWalt bought Emglo years back. DeWalt part number A18682is what you are referring to. Rol-Air would be part number REG0375. Here is a diagram of the newer DeWalt version. Reference part #32 is what you want.

http://servicenet.dewalt.com/Products/Detail?isId=true&productNumber=D55271&selectedType=16219

Jul 16, 2011 | Air Tools & Compressors

2 Answers

HOW MANY CFM DOES THIS COMPRESSER DELIVER AT 100 PSI


If this is the compressor the amount is 16.2 at 100PSI. PLease see attached link:

http://www.toolfetch.com/p-d55275.shtml

I hope this may have helped,
Tom

Oct 16, 2009 | Dewalt D55275 8 Hp Gas - Powered 17 -...

2 Answers

DeWalt emglo compressor does not start


hello,
well,you have to release the pressure,the cut out pressure at 120 psig.reached,and the cut in pressure maybe at 40 psig.so after realeasing pressure at cut in the compressor will run.if the compressor not run at cut in or after releasing check your power supply if still have,swicth off power breaker,by pass pressure switch,by disconnecting the line on terminals of pressure swtich,connect the line w/out pressure switch
the wire line should supply the the compressor,
open the service valve of compressor,switch on
observe if compressor run and develop pressure or air is coming out to nozzle,if that so switch off again and replace pressur switch.you have defective pressure switch,regards rate me,thanks

May 02, 2009 | Heating & Cooling

1 Answer

Regulator will not turn


I AGREE WITH EDITOR 925. ALSO MAKE SURE YOUR NOT TRYING TO EXCEED THE PSI OF THE REGULATOR OR COMPRESSOR. TYPICALLY YOU PULL THE CAP UP A TINY BIT AND TURN IT. IT MAY BE MAXED OUT ALSO.

Mar 09, 2009 | Dewalt 2 Hp 4 GAL Air Compressor

1 Answer

Manual for Emglo Air Mate Compressor


Manual for the similar dewalt model is at www.dewalt.com, click on parts & service icon, then enter D55151. Or try clicking here: http://www.dewaltservicenet.com/documents/English/Instruction%20Manual/5135175-01,D55152,Elec.pdf This Dewalt compressor is one of many versions of the Old Emglo AM78 compressor. There are several other brands built with the exact same design such as the Senco line. For parts list of actual Am78hc4v go to mastertoolrepair.com. If you have questions or problems with this compressor please email, Good luck

Jan 28, 2009 | Dewalt d55151 factory reconditioned emglo...

1 Answer

Which part to replace?


You need to replace the regulator (pressure adjustment assembly.)
You can find the part number by searching on the DeWalt web site. It's important to know not only the model number but also the type number of your compressor; the type number is which version of the compressor you have.

Jan 13, 2009 | Dewalt d55151 factory reconditioned emglo...

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

15937 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...