- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may download a copy of the manual at http://www.general-imaging.com/uploadedFiles/10_Our_Cameras/Cameras/Smart_Series/A1255_A1455_Q1455_J1455_UM_Eng.pdf The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you may use any photo cataloging program such as Picasa ( http://picasa.google.com ).
Its so simple enter the formula given below.
First press the C button then press the exposure mode change button ( this is what you used to change the exposure from auto to manual or photo modes) then again C button, then again exposure mode change button then 1 and 4 then start button ( this is what you press to take a copy)
Try this and put it right.
The fuse for the stop lamps is located in the passenger compatment fuse panel (see picture of location below) The fuse you are looking for will be in the number 24 position (see picture of layout below). this should be in your owners manual if you have one. If you don't have an owners manual and would liike a copy, you can email me at email@example.com with your make, model and year and I will be happy to email you a copy at no charge to you. i hope this helps and good lick.
The fuse for the radio is in the passenger compartment fuse panel (see picture of locationg below). the fuse you're looking for will be in the number 6 position and should be a 10 amp fuse (see other picture below of layout). This should be in your owners manual if you have one. If you don't and would like a copy, you can email me at firstname.lastname@example.org with your make, model and year and I will be happy to email you a copy. don't worry, no cost. I hope this helps and good luck.
Instead of having to cut, paste and post a bunch of pictures for you, email me at email@example.com with your make, model, year and that you need an owners manual and I will be happy to email you a copy of it which has the layout pictures of what fuse is what. don't worry there is no charge for the owners manual and am in a rush this morning or I would have pasted the pictures for you. anyway hope to hear from you so I can send that to you and help you out.
There are 2 places that you can look at. In the fuse panel located inside the vehicle in the number 3 position (see picture below) is the fuse for the blower motor relay coil & in the number 3 position is the blower motor relay itself. This should be in your owners manual if you have one. If you don't have one and need a copy, you can email me at firstname.lastname@example.org with your make, model, year and what you need and I will be happy to email you a copy. don't worry no cost to you. Anyway, I hope this helps and good luck.
Each time you execute finalization, the disc remaining space will decrease by approximately 13 MB. If you don’t have enough room, it won’t allow you to finalize the disc.
To finalize this disc, you have to delete some pictures to make enough space. But don’t worry, before you delete those pictures, you can save them to your computer.
Find out the CDs came with your camera, refer your manual page 51 - 61 to install ‘PIXELA PTP Manager’ , connect your camera and computer with USB cable, and copy some pictures to your computer, then delete the pictures on camera side. If still not enough room, copy more and delete more. make it enough to do the finalization.