Question about Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

1 Answer

Our miele dishwasher won't start. It's giving us a code 'P70'. We had not cleaned out the garburator, which was full of coffee grinds. What should we do.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

The display shows P and the digit/s of the set value alternately. Setting range: P0 = Sensor Softener active. P1 to P70 = Water hardness,
you have to set the water hardness of the dishwasher

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Miele coffee machine is not grinding the coffee and only delivering water. I have cleaned the brew unit but still no coffee. Any suggestions?


Sounds as if the grinder and or the coffee chute is plugged with grounds, this can happen when using a very fine grind and /or a very oily bean. Sometimes the grinder can be cleared when taken all apart and cleaned with a tooth brush - but this would require a service tech for the most part - have to take quite a bit apart to do this

Oct 30, 2017 | Miele Coffee Makers & Espresso Machines

1 Answer

I have Miele coffee system CVA 4062 the grinder is not working properly? I have cleaned everything, Descaled all that good stuff.


Its likely to be the brushes in the Grinder motor. These are replaceable but Miele does not sell them as a spare part. You may be able top fabricate your own if your technically minded and experienced and can disassemble the machine. Otherwise grinder needs to be replaced. Regards

Jan 18, 2017 | Miele Coffee Makers & Espresso Machines

1 Answer

The machine was not dispensing any coffee at all! I cleaned the nozzle with a fine wire and now it is making espresso, but not coffee????


I suspect your type of coffee beans is too oily. Try another type of coffee. Otherwise the grind settings is probably too fine. Change it two steps at the time.

If all this doesn't work, you are due for a full cleaning machine at the Miele service centre. Or you have a leak inside (tubes or the brew unit drive). Many causes are possible according to the description you posted.

Oct 08, 2014 | Miele CVA4070 Coffee Maker

1 Answer

Will not empty water


Hi.

If the machine does not drain you usually have drain blockage. Clean the drain well at the bottom of the tub. remove and clean filter and assembly parts. Make sure that the drain hose at the back of the dishwasher is not kinked.

Several Miele dishwasher uses a pressure switch to determine the water level. A defective pressure switch may prevent the machine from starting.
If this model uses a pressure switch, the switch will be located in the drain line. When a pressure switch is defective the machine should return an error code. Here a picture of the pressure switch:

12_15_2011_6_07_38_pm.jpg

If that does not fix the problem the pump located under the bottom panel must be tested.

Regards.

Ginko

Dec 15, 2011 | Miele 24 in. G2180Vi Built-in Dishwasher

1 Answer

Hi, my Miel, Inspira series dishwasher makes a very loud grinding noise for a few seconds and shuts down...


It must be trying to drain out water but the pump mechanism might be rubbing due to faulty bearing. Need full model number before I can give you more details to look for. Is this happening right at the beginning of the wash cycle?

Feb 11, 2011 | Miele Dishwashers

1 Answer

Fault F 17 appears when in use. Starts grinding the beans but no coffee in the cup yet. What does F17 mean?


f 17 is no water flow. It usually occurs when the brew unit has not been cleaned regularly, when the coffee grind size is set too fine, or when oily beans are used. You can try to soak the brew unit in hot water for a while, and run water through it in the sink. Unfortunately, most cases require brew unit replacement. A properly cleaned and maintained brew unit should last the life of the machine.

Jan 26, 2011 | Miele CVA4070 Coffee Maker

1 Answer

It has started sounding really, really loud with a long grinding sound and then like a swishy sound for a short break, then the grinding sound again.


Sounds like a piece of broken glass or hard fruit pit stuck in the garburator. Remove the botom rack and disassemble the eniter assembly located below the bottom rack. Keep track of the order of the parts until you reach the stainless steel garburator blade. If you are not mechanicaly inclined, take video of the dissasembley to help you put things back together. You will probably find a foreign object by the time you reach the blade. Continue disassembling the assembly below the garburator to ensure that the drainage ports are not obstructed. Consider re-assembling without the garburator blade to avoid recurring problems. Substitute Garburator blade with routine disassembley and cleaning every 3-6 months. Sadly thats the best way to overcome the failure prone Garburator mechanism. When its time to buy a new D/W, buy one with a filter instead of a garburator. I recommend Miele and recomend against all Whirlpool brands (Maytag, Jennair, KitchenAid, Kenmore, Whirlpool, WhiteWestinghouse, etc.)

When Garburators Jam, you risk overheating that can melt the overpriced circuit board or overheat the motor. Either problem means discarding the dishwasher becasue the repair cost would be too high. The Garburator is a disgusting idea anyway. Instad of allowing food particles to sit at the bttom, the sme particels are minced and sprayed over the dishes that you are trying to clean.

Oct 24, 2008 | Maytag 24 in. MDB7600A Jetclean® II...

Not finding what you are looking for?
Miele Optima G2430SCi Stainless Steel Built-in Dishwasher Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dishwashers Experts

mpservices

Level 2 Expert

128 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Miele Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...