Question about Mtd Products Yard Machines 158CC Tiller
I need operators manual for tiller MTD 214-430-000
Posted by Anonymous on
Go to MTD website to obtain manual or google manual by model number followed by the word mtd or tiller
Posted on May 11, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you go to Sears.com, then go to parts,then type in the model number, then look to the right and scroll down slow you will see a spot that says get manuals for this model and click on view manuals then any manuals they have you can print them out.
Posted on Feb 27, 2009
I went to MTD web site and they had all the manuals for all there products. You will need a model and serial number to get them. Thank you for responding back to me.
I got the manual for the tiller and the engine.
Posted on Apr 13, 2009
Well I cannot find the size but I did find the part # and a place to order the part. Hope this helps
Part # 754-0434
Can get from the following
Posted on Apr 17, 2009
I had similar problem recently with 2007 Huskee MTD series 410. The shift assembly bent and couldn't move the clutch collar all the way over on the drive shaft.
Posted on May 27, 2010
I had the same problem. After splitting the case, I found that the shifting fork was bent and the pins that move the shift collar were worn. I made new pins for and reinforced the shifting fork, put it back together and if worked for a few minutes until it would jump out of gear while tilling. I would try to hold the external shifting rod down so that it would not jump out of gear but eventually it quit working completely. I tore it down again and the pins were already work out. I ordered a new detent ball and spring for less than $10 including shipping. This seems to have cured the problem. Apparently the detent spring was weak which allowed the shifting collar to disengage from the drive gear when under load. The original spring had been replaced with a new part number so it may have been made stronger. Tearing one apart is not easy but is certainly doable. To make it easier, put the nuts back on the bolts from where they came. Also get the parts manual picture to help with reassembly. Be careful with the case gasket. It costs a ton for a new one but since the grease is so thick, you could probably silicone it back together if you destroy the gasket.
Posted on May 09, 2011
Tips for a great answer:
Jun 11, 2011 | Mtd Garden
May 22, 2011 | Mtd Garden Tiller (Mtd)
Jan 13, 2011 | Mtd Products Yard Machines 158CC Tiller
Jun 16, 2010 | Mtd Troy-Bilt Bronco OHV Tiller
Sep 30, 2009 | Mtd Products Yard Machines 158CC Tiller
Apr 13, 2009 | Mtd Garden
Feb 27, 2009 | Mtd Bronco Rear Tine Tiller
Feb 19, 2009 | Mtd Products Yard Machines 158CC Tiller
Apr 17, 2014 | Mtd Products Yard Machines 158CC Tiller
316 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: