Question about Brother MFC 7420 All-In-One Laser Printer

Open Question

Reset Brother MCF7420 drum counter - Brother MFC 7420 All-In-One Laser Printer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jaylex
  • 417 Answers

SOURCE: Brother HL-5240 drum light flashing

Normally clearing the drum count the machine has to be on open front cover as if to change the drum press and hold the button in for about 10 second then release and shut the door. This should reset the count if not please get back to me and I'll check the service manual to see if anything in that.

Thanks J

Posted on Feb 04, 2008

POCBM
  • 121 Answers

SOURCE: Brother HL 1250 Laser. Drum & page counter

Reset the drum counter as follows:

  1. Open the front cover.

  2. Locate the control panel button under the LED lights on the left side.

  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.
  4. close front cover

Posted on Mar 23, 2009

  • 2 Answers

SOURCE: how to reset the drum counter on a brother printer HL5270 DN

There should be a way to reset the drum setting. Call Brother they will help you are look in your manual.

Posted on May 30, 2009

  • 2 Answers

SOURCE: how to reset drum counter for brother hl4070cdw laser printer

When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps:

  1. Turn the printer power switch back on.
  2. Press the + or - button to choose "Machine Info".
  3. Press OK to proceed to the next menu level, and then press the + or - button to choose
    "Reset Parts Life".
  4. Press OK, and then press the + button to choose "Drum Unit".
  5. Press OK two times.

Posted on Aug 29, 2009

techbuster
  • 5081 Answers

SOURCE: How do I reset the drum counter on MFC-9440CN

To reset the drum unit counter, follow the instructions below:

  1. Press Menu on the Control Panel.
  2. Press the Up or Down Arrow key to select Machine Info..
  3. Press OK.
  4. Press the Up or Down Arrow key to select Reset Menu.
  5. Press OK.
  6. Press the Up or Down Arrow key to select Drum.
  7. Press OK.
  8. Press 1 to reset the drum unit counter.

Posted on Aug 31, 2009

Testimonial: "THANK YOU THANK YOU THANK YOU Quick response and WONDERFUL HELP TO START MY MONDAY:)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix brother printer drum error troubleshooting and routine maintenance


I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one. The following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter as instructed below.

If you want to clear an error message related to the toner replacement, click here to see how to clear an error message after you replaced the toner cartridge.
"What is the difference between the toner cartridge and the drum unit?"

Please reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.
  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear or Clear/Back on the control panel.?
    NOTE: The layout of a control panel differs depending on the model, but the Clear or Clear/Back button is located on the right side of the LCD screen as shown in illustration.
  4. Do one of the following.

    • If your Brother machine has a numeric keypad:
      Press 1 to reset the drum counter.
    • If your Brother machine doesn't have a numeric keypad:
      Press the Up Arrow Key to reset the drum counter.
  5. When the LCD shows Accepted, close the front cover.

frontcover1-y4i03b33115mpu3ejihwhjwc-5-0.gif

controlpanel1-y4i03b33115mpu3ejihwhjwc-5-2.gif

Sep 11, 2017 | Brother Office Equipment & Supplies

1 Answer

Drum error dr-420


Sir/Madam

he following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter,
Or Visit official Brother Printer website For Brother Printer Troubleshooting Page Url Below:http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en

Or
Still Having Problem then follow Us On For

Brother Printer Support

Jan 14, 2014 | Brother Office Equipment & Supplies

1 Answer

Reset the drum counter on Brother MFC-8950DW


To reset the drum counter on a BROTHER MFC-8950DW open the front cover, press the start '*' button on the keypad, the screen will show the reset menu, click drum, click yes, and you will get a message on screen accepted. The procedure listed in the brother manual for this machine is wrong and does not work.

Nov 20, 2013 | Brother MFC-9840CDW Laser Printer

1 Answer

I have a Brother MFC-9180, it has a DR8000 in it. The machine come up on the display saying "Change drum soon" which I have done, the new drum did not come with a page to feed into the drum. I want to...


Did you reset the drum counter?
When you replace the drum unit with a new one, you need to reset the drum unit counter by completing the following steps:
  1. Turn the the machine's power switch back on.
  2. Press Menu => Machine Info. => Reset Menu.
  3. Press the Up or Down Arrow key to choose Drum.
  4. Press OK.
  5. Press 1 to reset the drum unit counter.
  6. Press Stop/Exit.
I hope this helps.

Or Try this:
http://welcome.solutions.brother.com/BSC/public/as/au/en/faq/faq/000000/002800/000037/faq002837_009.html?reg=as&c=au&lang=en&prod=mfc7220_us_as

Oct 20, 2013 | Brother International Brother MFC-9180

1 Answer

Reset drum counter for Brother mfc-7225N all in one laser printer?


Brother Drum Reset Instructions:

This works on the Brother DR-510 and many others.

Brother Laser Printers:

After replacing the drum unit, keep the front cover open (make sure the power is on). Press and hold the "GO" button until all four LED's are lit. Once the four LED's light up, close the front cover. Make sure the drum LED is off. The counter is reset!

Aug 24, 2010 | Brother MFC-7225N All-In-One Laser Printer

1 Answer

How do I reset the drum counter on the a Brother MFC-7840W???


open the front cover of machine ( where the cartridge is installed), then press the clear button, and then press 1 for yes for change drum question.

May 13, 2010 | Brother MFC 7840W Printer

1 Answer

Replace drum, still says replace the drum and now it won't print.


Did you reset the drum counter?
When you replace the drum unit with a new one, you need to reset the drum unit counter by completing the following steps:
  1. Turn the the machine’s power switch back on.
  2. Press Menu => Machine Info. => Reset Menu.
  3. Press the Up or Down Arrow key to choose Drum.
  4. Press OK.
  5. Press 1 to reset the drum unit counter.
  6. Press Stop/Exit.
I hope this helps.

Cindy Wells
(if you did the reset, you may need to talk to Brother Support. I'm assuming you used a Brother drum and only handled it by the handles.)

May 12, 2010 | Brother MFC-9440CN Laser Printer

1 Answer

How do I reset the drum counter on MFC-9440CN brother


To reset the drum unit counter, follow the instructions below:
  1. Press Menu on the Control Panel.
  2. Press the Up or Down Arrow key to select Machine Info..
  3. Press OK.
  4. Press the Up or Down Arrow key to select Reset Menu.
  5. Press OK.
  6. Press the Up or Down Arrow key to select Drum.
  7. Press OK.
  8. Press 1 to reset the drum unit counter.

Aug 31, 2009 | Brother MFC-9440CN Laser Printer

1 Answer

Drum counter is flashing


The following information is an excerpt (Step 7) from an FAQ on the Brother website found here http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/faq/faq/000000/000100/000054/faq000154_029.html?reg=eu&c=pt&lang=pt&prod=hl1440_all&Cat=7&ot=eu_ot

Reset the drum counter as follows:
  1. Open the front cover.
  2. Locate the control panel button under the LED lights on the left side.
  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.

Apr 06, 2009 | Brother HL 1440 Laser Printer

2 Answers

Brother HL 1250 Laser. Drum & page counter


Reset the drum counter as follows:

  1. Open the front cover.

  2. Locate the control panel button under the LED lights on the left side.

  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.
  4. close front cover

Mar 23, 2009 | Brother HL 1250 Laser Printer

Not finding what you are looking for?
Brother MFC 7420 All-In-One Laser Printer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...