Question about Nova Development Photo Explosion Deluxe Version 3

1 Answer

Can't install disk 2 for photo explosion deluxe 3.0

Disk one installs and when i put disk 2 in it was loading for 30 minutes and i knew there was a problem so i stopped the download and put disk one back in to start over and it asked for disk two and was loading for an hour and a half so i knew there was a problem and took it out again. i am running a dell studio XPS 1340 vista 64-bit

Posted by on

  • fikeuall Jun 23, 2009

    i did try all that, well before when i was trying to install the program and was on the 2nd disk it would get so far and stop downloading but you can still hear it running in the computer then all of a sudden the computer just shut off and when i turned it back on i went to my computer and clicked on the dvd drive to open the disk and it would not open at all. now this time i tried to reload it and no it doesn't get nearly as far and it keeps asking me to put disk two in even though it is already in.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

Does it appear to be loading anything from the sisk or does it just turn the access light on and do nothing? It could be the second disk is damaged. Check the back side of the disk for a fingerprint mark or scrathches. clean off the priint and try again.
Does the disk read ok in File Explorer, try opening a file and see if it can at least access the disk dont matter if it cantb open the file because it doiesnt have a program that can open it, you are just checking the readability!

Posted on Jun 23, 2009

  • dennis bullard Jun 23, 2009

    http://www.brothersoft.com/photo-explosi...

    here is a link to a down load.. use it to install and then put your registration details in to activate it and see how it goes


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My program photo explosion deluxe version 3 will not opened when downloaded to my new computer that operates windows 7. what should I do to get this program workining, I do not like version 4 of photo...


Hi!
What I understand is that your photo explosion deluxe is a windows xp software. Since it is not working readily out of the box in windows 7 then what you could do is install windows xp mode for windows 7. Windows xp mode allows xp software to be installed and windows 7. What you need to do is just download windows xp mode and install it. After which you could then install that software on there. Just make sure to uninstall your current installation of photo explosion deluxe before you do this.
Here is the link to the download for windows xp mode: http://www.microsoft.com/windows/virtual-pc/download.aspx
And Here is the link to some of their videos on how to use xp mode so that you could understand further how to set it up: http://www.microsoft.com/windows/virtual-pc/support/default.aspx
If you have any more questions or concerns please feel free to come by again here at fixya.com
You have a great day.

Feb 15, 2011 | Nova Development Photo Explosion Deluxe...

1 Answer

Problem loading photo explosion delux version 3 disc 1


You can right-click on the program's setup.exe, select properties, then compatibility and set it to windows XP
then try to install it again

Dec 15, 2007 | Nova Development Photo Explosion Deluxe...

1 Answer

MPEG VIO Driver Error photo explosion special edition 3.0


How to correct a Load MPEG VIO Driver Error in Windows Vista.

If you are experiencing this issue with Windows Vista, please follow these directions:

Note: These steps are only for Windows Vista. If you are experiencing the problem on Windows XP, please see the directions found here: KB Article 1469

1. Uninstall Photo Explosion 3.0.
2. Reinstall Photo Explosion 3.0.
3. Restart the computer.
4. Download the Vista update for Photo Explosion 3.0 from the following link:

http://www.novadevelopment.com/Support/Updates.aspx

Note: Please make sure you download the correct one for your version of Photo Explosion 3.0. If you have the Deluxe version, download the Deluxe update. If you have the regular version, download the non-Deluxe update.
5. Save the update to an easily accessible location, such as your Desktop.
6. Once downloaded, go to where the update was saved and double-click the update.
7. After installing the update, you should no longer experience this problem.

Note: It is extremely important that you do not run Photo Explosion until you have restarted the computer and installed the update. If you run the program before installing the update, you will need to start the steps over from the beginning.

This comes directly from the Nova FAQs. Hope this helps!

Jun 30, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

I have Windows Vista operating system and my computer won't let me install photo explosions deluxe version 3 that I had on my old computer that was windows xp


Right Click the .exe file of your photo explosions deluxe and choose properties and then click on Compatibilty tab and then click on Run this program in compatibility mode for Windows XP Service Pack 1 or 2

Apr 17, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

Can i install photo explosion deluxe version 3 on 7?


Photo Explosion 3.0 requires: Windows 2000, XP or Vista,Pentium III or Faster ,128 MB RAM ,CD-ROM Drive .It wont work on 7

Mar 05, 2010 | Nova Development Photo Explosion Deluxe...

1 Answer

Error 1305 installing Photo Explosion


Do not install on program files.Sipmly creat new folder on C: then install it there...

If it wont work the CD is damanged

Good luck

Apr 16, 2009 | Nova Development Photo Explosion Deluxe...

2 Answers

Installing Photo Explosion Deluxe


Did you look in C:\Program Files\Common Files folder?
Some programs will place shared files in here.

If that does not work, download the Windows Installer Cleanup Utility from:

http://support.microsoft.com/kb/290301

Install it, then run it from Programs. If you see either of these programs have the utility remove it.

Oct 13, 2008 | Nova Development Photo Explosion Deluxe...

1 Answer

Photo Explosion Version 3


remove the software from the control panel.Then re-install the software again.and forget to remove the earliest software

Nov 29, 2007 | Computers & Internet

1 Answer

Installing disc 2-- photo exp deluxe 3


Is E: your CD Disk Drive?
Try changing to the proper Drive letter that the install disk is in.
Go to "My Computer" to find out.

Nov 19, 2007 | Nova Development Photo Explosion Deluxe...

Not finding what you are looking for?
Nova Development Photo Explosion Deluxe Version 3 Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nova Development Computers & Internet Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

Computer Links

Level 3 Expert

2385 Answers

John Hong
John Hong

Level 3 Expert

787 Answers

Are you a Nova Development Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...