Question about Whirlpool Cabrio 7.0 Cu. Ft. Super Capacity Plus Electric Dryer
How do you manual reset for a WTW8500BW0 Whirlpool Cabrio
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
"AF" is a restricted air flow condition. You say you've only had your dryer for 3 months, but have you ever cleaned the ducting? You need to check the lint screen after every load, AND you need to perform routine cleaning of the dryer venting (inside the dryer, as well as the vent line from the dryer to where it exits the house) about every three months. If left in this condition, the dryer heating circuitry will eventually failed and/or you could cause a fire hazard. An easy way to check to see if you have a clog somewhere is to remove the dryer vent hose from the back of the dryer. Run the dryer to see if you have air flow coming from the back of the unit. The air should be about 140 degrees F and forceful. Check to see if the error comes back. If everything runs fine, then you know the problem exists in the vent line between the dryer and where it exits the house. If you still have problems, you will need to unplug the dryer, remove the back panel and inspect the interior for clogs. At least you have a dryer that warns you when the air flow become restricted or blocked. Most dryers will continue to run until they overheat or fail. I hope this information is helpful. Post back with your comments and let me know.
Posted on Jan 27, 2008
have a problem with my cabrio dryer its powered on but when i push start the sense like comes on and does nother whats the problem
Posted on Oct 14, 2009
I'm trying to replace the motor from my Whirlpool Cabrio (WED6400SW1) dryer. The motor is impossible to remove from the blower. I can't break the motor away without stripping the plastic blower nut that connects to the two. What do you recommend I do at this point. I'm thinking that I should try to seperate the two by cutting the plastic connection and order a new blower fan.
Posted on Nov 28, 2009
Tips for a great answer:
Jan 10, 2017 | Whirlpool Washing Machines
Jan 13, 2016 | Whirlpool WTW6400SW Cabrio Washer
Nov 26, 2015 | Whirlpool WTW6400SW Cabrio Washer
Sep 14, 2014 | Whirlpool WTW8800YC 4.6 cu. ft. Cabrio...
Nov 28, 2012 | Whirlpool Cabrio WTW6600SBT Top Load...
May 18, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Nov 10, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...
Feb 11, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: