Question about Craftsman Gas Mini - Tiller/Edger

Open Question

How do I get to the pull rope and replace it on a craftsman 32cc/9" wide 2 cycle mini tiller. Model 31629264

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sleprocks
  • 147 Answers

SOURCE: starter rope pulled out and wont retract on

remove the starter cover and try to wind the starter rope manuly. the rope may have to be replaced if worn or broke..

Posted on Oct 22, 2009

  • 3 Answers

SOURCE: I have the Craftsman mini

The silver cone is held by one torx screw, but you need to slide a screw driver undr the housing so it will not turn while you unscrew it.

Posted on Sep 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I pull start rope on my Craftsman 32cc 4 cycle weedeater . . . engine does not turn over . . . when I let go of the rope and it retracts . . . what is wrong?


There are 2 dogs or fingers that expand out to grab the flywheel when the rope is pulled They are sticking and can not expand or slide out. Remove the recoil unit and free them up When the recoil unit is off pull the rope and watch the action

Jun 08, 2015 | Craftsman Garden

1 Answer

The starter rope won't move on the mini tiller when I try to pull it


The starter housing is a lousy design; ours also failed just out of warranty and after dis-assembly, I still could not free it.

The part number for the complete housing is:

753-05769

Direct link:

http://www.searspartsdirect.com/partsdirect/part-number/753-05769

I see the price is up a few dollars but I bought two after seeing the nature of the problem so have a spare in the shed.

We had no problems with the replacement so there may have been some change in the design.
Swapping the head does require some attention but don't lose patience, you can do it.


A add-on comment; The design or orientation of the blades allows a ridge to form in the center but pulling to the side (blades are then diagonal) prevents this from being a problem.

Jun 07, 2014 | Craftsman 2-Cycle Mini Tiller

1 Answer

Starter cord


remove top starter assy. cut grip from old rope ease rope into spool,
when slack remove center screw and carefully pull out spool, tie knot in rope and thread into spool, wind rope [make sure correct size rope]
around spool until full,carefully turn spool into spring 1 turn then replace screw. put rope into notch on spool and wind up 3-6 turns,
replace grip

May 19, 2012 | Mantis 2-Cycle Tiller

1 Answer

I own a 2 cycle mini tiller craftsman and I need a manual for it. I want to tune up tiller it's blowing smoke.


Manuals for many Craftsman tools are available here: http://www.managemylife.com/mmh/owner_manuals . Lots of tillers are listed just by searching for Craftsman tiller. If you can find the model number (usually on a plaque on the housing of the tiller), you can narrow down the list greatly.

I hope this helps.

Cindy Wells

Mar 31, 2011 | Mtd Craftsman 4Cycle Mini Tiller

1 Answer

Starter rope pulled out and wont retract on craftsman trimmer/edger 32cc convertible incredi-pull


remove the starter cover and try to wind the starter rope manuly. the rope may have to be replaced if worn or broke..

Oct 22, 2009 | Craftsman Garden

Not finding what you are looking for?
Craftsman Gas Mini - Tiller/Edger Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

Dean Gruber

Level 2 Expert

110 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...