Question about Eddie Bauer Baby Gear
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the lower frame bar locks the canopy onto the frame. Remove this and remove the brackets from the frame. drill out the rivit on one side (take note of the location of the snap and washers) and then remove the frame from the bracket and canopy. you then use a 1 inch 5/32 rivit to reassemble.
Posted on Oct 06, 2008
SOURCE: dismantleing canopy
If this is for the Graco Snugride (I have the Windsor model from the Quattro Travel System), this will work:
1. Push the Graco canopy to one side, exposing the plastic support bars that hold the canopy in place.
2. The center of the support is where the canopy comes apart. Using both hands, pull the canopy support
bar apart (as if you were playing tug-of-war). It's best to grab the curved ends and pull HARD (and point it away to the side so that you don't hit your face).
3. Once the support bars are apart, remove the old Graco canopy and slip on the new/freshly washed canopy.
4. Secure the support bars by snapping them shut, and then slide the canopy into place.
Posted on Feb 07, 2009
First, snap out the black pieces that attach the cover to the seat with a pair of pliers or a kitchen knife. Then turn the seat over and remove the base by sliding out the metal rod that runs thru the base and seat. Then unhook the center buckle from the bottom of the seat and back up thru the seat. Unhook the straps from the metal bar on the back of the seat and thread them back thru the seat. Be sure to remember the order in which you slide it thru the components so you can reassemble. It may be helpful to lay them out in the order you removed them. Unhook the elastic bands holding the bottom in place and slide it over the top part of the seat and off the seat. If you need to remove the top part and wash, remove the black pieces the same way as the bottom, unhook all elastic and slip it off the top. I wash mine in cold water with mild detergent and usually let it air dry so as to not shrink it. Reassemble by reversing steps.
Posted on Jun 15, 2009
The manufacturer's instructions are the final authority - don't trust anyone else giving you instructions! Here are the links to download Dorel/Eddie Bauer carseat instructions:
Posted on Mar 25, 2010
Tips for a great answer:
Jun 11, 2016 | Eddie Bauer Baby Gear
Feb 24, 2016 | Eddie Bauer Baby Gear
Apr 27, 2012 | Eddie Bauer Adventure Travel System Bryant...
Aug 16, 2009 | Eddie Bauer Baby Gear
Jun 22, 2008 | Cosco Eddie Bauer Lightweight - Blanchard...
May 24, 2008 | Eddie Bauer Lightweight Travel System...
Mar 17, 2008 | Eddie Bauer Lightweight Travel System...
Oct 26, 2007 | Eddie Bauer Lightweight Travel System...
235 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: