Question about Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher
Please help, i don't have money for the repair bill!
Probably the washing pump does not start.
This could be a problem of the pump or the control unit.
You can find a free service manual here:
Posted on May 11, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I would assume the culprit is the glass in the pump housing. Taking out the pump is a teadious and time consuming task but can be done. Varies from model to model. Usually when hard debris gets into these pumps, unless there metal, it demolishes the plastic impeller blades and the pump must be replaced. If you wish t tackle this let me know ^_^ ill find you a new pump n the net fr the cheapest price if needed. Try taking the punp out first and cleaning it out as much as possible and let me know !
Posted on Sep 15, 2007
SOURCE: FDW60 dishwasher
I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! it started straight away.
The question now is where is the water coming from? It seems there is obviously a leak somewhere and water is gathering in the undertray setting off the microswitch.
Posted on Nov 05, 2007
SOURCE: Hotpoint Aquarius DWF31
I had to call a angineer in the end.If your problem still going on.You can try what engineer did it.Turn the dishwasher on and press the program end button (quick wash and normal wash button in the same time). you should hear a pump out water sound.Wait until finish and display 0 again.Than swich off the machine.wait little bit than turn it on again and press a program button.If your problem is over fload device activated like mine.You shoud hear to begin working and getting water in.
It cost me £40 to bring the angineer in and press these two button.5 min.job.Good luck
I hope this information help you.
Posted on Jan 16, 2008
SOURCE: HOTPOINT DISHWASHER FDW60
I have just had my dishwasher fixed by Hotpoint, as the heater was working and the dishwasher only stopped with the fast and delicate lights just before the drying process he replaced the main control board. This has solved the problem, I suspected the fault to be the thermistor as the heater seemed to be getting to hot but I had no idea where it was.
It turns out the thermistor is attached to the main control board and hangs down behind the front door that gives just a rough temperature level for the main control board.
As it's soldered directly onto the control board I would suggest replacing the whole control pcb for anyone with this fault unless you can find any spec details for the thermistor.
Posted on Mar 23, 2008
Tips for a great answer:
Apr 30, 2018 | Passport Cell Phones
Jan 10, 2018 | The Office Equipment & Supplies
Sep 30, 2014 | Cars & Trucks
Jan 06, 2018 | Green Living
Oct 26, 2011 | Braun 360° Complete 8985 Electric Shaver
Aug 01, 2011 | Monopoly Games
Jul 13, 2011 | Zynga Texas HoldEm Poker
May 09, 2011 | Uniden BC60XLT-1 Handheld Scanner
$1500, Euro or British pounds.
2 each - $500 bills $100 bills and $50 bills.
6 - $20 bills
5 each of - $10 bills $5 bills $1 bills
if you have any further questions message me back and Thanks again for using fixya please also remember to rank how this opinion has helped
Jan 13, 2011 | Monopoly Toys
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: