Question about Office Equipment & Supplies

Open Question

Looking for spare cogs for challenge vs1202cd

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Looking for spare parts for a Challenge Paper Shredder model S213

Hi there. I've got the same shredder which I purchased couple of months ago so maybe it's not that olod model after all :) The problem with mine is that the small thing that sits inside and "feels" when you feed the paper and which triggers shredder to operate, has broken in to two. My hubby tried to glue but I don't see any success there. Any chances to get that spare part any where?

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Challenge cross cut paper shredder model S820 Batch 0919.1 of the plastic cogs have stripped, its the 1 that the electric motor drives. Can I buy a new cog from anywhere in the UK ??


Sorry but they do not even sell them here is US . the entire machine costs less than a new gear would if you can find it . I made myself one out of brass severals years ago , but would not do it for anyone else . took forever .

Nov 25, 2015 | Cross Office Equipment & Supplies

1 Answer

Challenge paper shredder spare parts


You could get a kit depending on the model of the shredder if you searched the internet or going on a well known auction site to find the parts you require.

Aug 13, 2014 | Office Equipment & Supplies

3 Answers

What is error 8 for jura a imperssa


You can find some detail procedure in this tip below
http://www.fixya.com/support/r5713182-jura_capresso_impressa_f9_malfunction_8
Try it since it have help some other with same problem.

Apr 26, 2010 | Jura Capresso Impressa S9 Coffee...

3 Answers

Looking for spare parts for a Challenge Paper Shredder model S213


Hi there. I've got the same shredder which I purchased couple of months ago so maybe it's not that olod model after all :) The problem with mine is that the small thing that sits inside and "feels" when you feed the paper and which triggers shredder to operate, has broken in to two. My hubby tried to glue but I don't see any success there. Any chances to get that spare part any where?

Jan 18, 2010 | Office Equipment & Supplies

1 Answer

Intimus simplex SE


Call the mfg, Schleichner, 919-775-7318. They'll give you the name and number of your local distributor for parts. The part number for the big white gear with the large holding pin is: M-76954.

May 27, 2008 | Intimus Simplex se Shredder

1 Answer

AEG LAVAMAT 74620 Update Gears on the fill tray have jumped. The primary and idler have to be installed correctly and are fool proof but the third, half gear, needs setting. Can you please supply pic or...


Found this on another site (fixed4free.com) posted by Dave in Jan 2009:

This is one of those things where a picture would be worth a thousand words, but as I can't put pictures on this site, the words will have to do!
- Turn the orange cog anti-clockwise as far as it will go, (putting the nozzle to direct the water to the conditioner drawer)
- Look closely at the orange cog and you'll see that the last-but-one tooth at each end of the row is shorter than the rest. Looking from above and standing at the front of the machine, I call the rightmost tooth on this cog number 1, the short tooth number 2 etc. (my cog has 17 teeth)
- Position the white cog so that (looking from above) the leftmost tooth on the top (incomplete) row of this cog is between teeth 2 and 3 of the orange cog. This should be such that if the white cog rotates anti-clockwise it will turn the orange cog.
Now the difficult bit:
- The shaft that the yellow cog fits on has four vertical 'webs' running down it. Look closely and you'll see that one of these is bigger than the other three. As you would expect, if you look carefully at the centre of the yellow cog it has three small slots and one bigger one spaced around the hole.
- This shaft can be VERY CAREFULLY rotated if you pull it gently upwards against it's spring and wiggle it while twisting it. NEVER force it, the cogs underneath are VERY fragile. If it won't turn, just let go, and try again.
- Look again at the white cog, and you'll see that two of the teeth on the lower (complete) set of teeth have no slot between them, they make a tooth that is 'double width'.
- Look at the yellow cog and you'll see that it has a 'double width' slot on it's lower row.
- The challenge is to rotate the yellow cog's shaft so that you can fit the yellow cog on it, aligning the double-width slot on the yellow cog with the big tooth on the white cog. This is just a case of trial and error, but is the key to getting everything back together.

COMPLICATED BIT OF EXPLANATION!!
The yellow cog only ever turns clockwise and the white cog is a clever bit of engineering allowing AEG to move the nozzle (orange cog) backwards and forwards across the five positions.
The yellow cog turns the orange cog anti-clockwise until it runs out of teeth, then the white cog turns the orange cog the other way.
After a full rotation of the yellow cog, the orange one has moved clockwise to the stain-treatment position and the by-pass beyond, then anti-clockwise back to the conditioner position.



Apr 16, 2008 | AEG Washing Machines

2 Answers

Musso gelato maker where can i buy parts


go to Http://www.catering-machines.com they have full list of spares or parts for Musso stella.
All parts for the musso ice cream machine including lid, motors, gear wheels, gearbox, musso paddle Musso serial numbers start L1 = Musso piccolo L2 = Musso stella L3 = Musso Club L4 = MUSSO CONSUL.

Oct 31, 2007 | Musso Stainless Steel Pola Ice Cream Maker

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...