Question about Altec Lansing Multimedia Computer Speakers
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Please refer to this link and read my solution as your speakers ALSO fall into the same category. I would like to help you out more , what do you need the driver for? what operating software do you have?
CLick this link and read the solution see if it helps!
Posted on Jan 21, 2008
Go to "Start", "Control Panel", Administrative Tools, Computer Management, click on "Device Manager" on the left hand side and look on the right hand side. See if you have a yellow exclamation next to the "Sounds, Video and Game Controllers". If yes, double-click on the line with the exclamation and then click on the driver tab at the top. Click update driver and when it asks if you would like to to check the internet for updated drivers, tell it yes, this time only and continue. After this process, it should either download and install a new driver for your sound card or install the one that was shipped with your computer. If this does not work, please let me know and we will check the next possible problem.
Please remember to rate this solution.
Posted on Sep 24, 2008
Unfortunately the subwoofer supplies the power to the amp on the speakers, Once again I have the solution,
These speakers are factory molded so that the only way to open them is to break the factory seal
this can be done by sharply rapping the seam at the bottom of the speaker with a heavy screwdriver handle or something similar.
Now you need to supply power to the amp...If you do not have the subwoofer you will need a 4.5volt power supply, after removing the board from the casing find the red white and black wires connecting
the orange plug wire to it, Personally I removed the entire cord from the unit, shough you can splice in at this point if you desire.
Connect the white lead to your posative on your power supply by either splicing or soldering, connect the ground to the heat sink using the screw that is already there holding the chip to the sink. reassemble the speaker.....super glue... and you are now in business.
Posted on May 22, 2009
Tips for a great answer:
Mar 09, 2015 | Altec Lansing Audio Players & Recorders
Mar 31, 2014 | Altec Lansing ACS 295 Computer Speakers
Jul 17, 2011 | Altec Lansing ACS 295 Computer Speakers
Jul 16, 2011 | Altec Lansing ACS 251 Computer Speakers
Jul 29, 2010 | Altec Lansing Multimedia Computer Speakers
May 17, 2010 | Altec Lansing VS4121 Computer Speakers
May 13, 2008 | Altec Lansing ACS 251 Computer Speakers
Feb 18, 2008 | Altec Lansing ACS 45.1 Computer Speakers
Nov 28, 2007 | Altec Lansing ACS 295 Computer Speakers
237 people viewed this question
Usually answered in minutes!