Question about Frigidaire AEQ7000ES Dryer

Open Question

Aeq7000 service manual - Frigidaire AEQ7000ES Dryer

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT DOES THE E66 MEAN ON MY AFFINITY DRYER


Good Morning Friend, this is Z, Thank you for your inquiry!

An error code E66 is associated with the heating element relay. A technician would typically check the ohm resistance of the relay to determine if it is the cause of the error code on your Frigidaire dryer. If the readings are incorrect, the heating element is replaced. If the readings are incorrect, it could potentially be the main control board. This is not a normal DIY job so you may want to connect with a local servicer to determine the exact diagnosis. I hope this helps explain the error code you are receiving.

May 21, 2014 | Frigidaire AEQ7000ES Dryer

1 Answer

My fridgiaire frontload 7000 will not heat


USE MULTIMETER AND CHECK HEATING ELEMENT AND THERMOSTATS, ARE U GETTING A FULL 240 AT THE OUTLET

Apr 23, 2014 | Frigidaire AEQ7000ES Dryer

2 Answers

I need to purchase the control board


Ok. Check an appliance repair shop for the part or Google the part number. You'll be surprised by how many places that sell control boards for your particular dryer

Mar 08, 2010 | Frigidaire AEQ7000ES Dryer

1 Answer

The dryer gives E68 it starts running dor 30


the code 68 on the aeq7000es series is indicative of stuck buttons [your control buttons on the front]They sometimes stick in the closed position or go open [fail] and I have found the bad switch and replaced just the bad switch[ there should be a series of test to determine which switch button is bad] and if the switch buttons are testing good ,then it's control panel time. The control panels are about $150.00 on ebay ,sometimes you can find a "make offer" deal,but their few and far between.

Nov 18, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

ERROR CODE 68 WILL NOT CANCEL. IF YOU PRESS CANCEL AND THEN START IT RUNS FOR ABOUT A MINUTE AND STOPS


code 68 [aeq7000es series]relates to "stuck buttons, or control panel issues. Try to see if your dryer will give you the code for which button is stuck and try to wiggle it to free it up if stuck. If all buttons check out good then you most likely have a bad control panel ,and its time to find your best deal on one

Sep 29, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

Frigidaire dryer AEQ7000EGO not heating up


you need to make sure you are getting 220, your dryer will run on 120 but not heat.

2nd check fuse that is located inside dryer near drum

3rd check heat elements for breaks.

Sep 12, 2009 | Frigidaire AEQ7000ES Dryer

1 Answer

Error code PF


PF means power failure. Check your electrical connections and voltage for proper voltage

Jul 09, 2009 | Frigidaire AEQ7000ES Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Frigidaire Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...