Question about Husqvarna Sewing Machines
Dropped needle into machine as I was loosening needle to remove from sewing machine.
Posted by Anonymous on
Remove the needleplate, turn the machine upside down and try to shake it out.
Posted on Feb 09, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Machine is locked up
When you say you can't get the arm to move are you talking about the needle bar, if this is the case the chances are if you broke the needle there may be a piece stuck in the bobbib case area but can you be a bit more explicit. Thanks Ken firstname.lastname@example.org
Posted on Sep 18, 2007
SOURCE: FEW STITCHES DROP IN BOBBIN
Dropped stitches troubleshooting:
1>change to a new proper needle (proper needle means quilting needles for free motion, stretch needle for knits, leather needle for leather, microtex needle for micro fabrics.....etc.) of proper size. Most sewers never need a needle smaller then an 80/12 when sewing. Smaller needles bend more easily causing more problems.
2>If a new needle doesn’t fix the problem, remove parts from bobbin case area (as best as easily allowable) and clean out all the lint thoroughly, and oil with 2-3 drops of oil where friction occurs (turn hand wheel and look for rubbing)
3>If still skipping, try a different spool of thread (Yes, thread can caused skipped stitches, not common but I see it).
4>If you haven’t solved it yet, sounds like you could need to make a lower level adjustment like hook timing.
To time the machine, you want the tip of the hook to pass just over the top of the eye of the needle when the needle is in the left most or right most position depending on which side the eye of the needle will be higher
Posted on Mar 21, 2009
I've had the Lo come on my screen of my sewing machine also, but normally when I turned it off it corrected the jam up.
Lo- A button is pressed when the machine halts due to a overload
wait 15 seconds to recover
if thread jamming causes the overload, remove the tangled thread
check the bobbin area for lint & loose threads
also check to see if the bobbin is warped
check you needle to see if it's bent-roll on a flat surface to see if it rolls correctly
if it's blunt it makes a popping sound when going thru fabric
let me know if these suggestions help
Posted on Sep 23, 2010
Tips for a great answer:
Jan 24, 2018 | Sewing Machines
Dec 03, 2016 | Sewing Machines
Aug 26, 2016 | Singer 8763 Curvy
Jul 13, 2016 | Janome Sewing Machines
Jan 08, 2016 | Sewing Machines
Oct 30, 2015 | Singer Sewing Machines
Jun 02, 2014 | Bernina Sewing Machines
Apr 04, 2012 | Sewing Machines
Mar 20, 2009 | Sewing Machines
Sep 22, 2008 | Singer Inspiration 4210 Mechanical Sewing...
30 people viewed this question
Usually answered in minutes!