Question about Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned

4 Answers

New Ryobi EX26 Edger started twice and won't now.

Starts every third pull and then dies soon after. Got it started twice and it ran great. Used correct mix of provided oil and 1 gallon gas.

Posted by on

Ad

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Turn the high mix screw just a little to the left it will have a letter H on one screw and L on the other

Posted on Jun 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are adjusters but no slots for screwdrivers

Posted on Jul 06, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is no H (or L) screw on the EX26. It has a prime bulb and idle screw, that's all there is. I've had two of these, the first I took back, now the second does same thing, I think I got junk.

I believe this is inherent and can't be corrected.

Posted on Jun 30, 2009

  • chuckek182 Jun 30, 2009

    This is chuckek182, I was wrong, there are H and L adjustments on EX26.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where are the hi and lo mix screws... are there metal covers over them?

Posted on Jan 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Powerhead runs but tools (blower, trimmer. edger) won't work.


Hi Jim Kamph...
You have a broken drive cable inside of the trimmer.You will need to replace the drive cable
Please rate me
Bud

Sep 26, 2012 | Ryobi Garden

1 Answer

How do you replace the fuel filter on a Weedeater PE 550 lawn edger?


You can find replacement fuel filters at a nearby hardware store. Once you have one, fish out the line from inside the tank and fit new filter onto line and place it all back into the tank. You will probably have to back out the tube a little after re-installation.

May 01, 2012 | Poulan Pe550 Gas Edger

1 Answer

Troy Bilt edger dies as soon as its under a load--like edging my driveway.


The only real explanation for this is that a tiny piece of dirt has gotten into one of the tiny fuel jets. Remove the carb and blow it out thoroughly with compressed air.

Nov 23, 2011 | Mtd Garden

2 Answers

Cant start ryobi 890r brushcutter


My Ryobi 890r brush cutter will start and then die

May 16, 2010 | Ryobi Factory-Reconditioned 30cc 18" Gas...

1 Answer

Ryobi blower stars and idles great. dies when you


Sounds like you need to clean the carb. Buy some carb cleaner and remove the lines to the carb and gently spray cleaner into each of the holes. Reconnect the lines.
Good luck!

Oct 24, 2009 | Garden

2 Answers

Ryobi EX26 dies when hot, won't start, then when cool starts


This sounnds too good to be true, but believe it!

The next time you run the trimmer and it starts to die, loosen the gas cap. It should start to run again. This means that the gas cap is clogged. Either clear the gas cap or buy a new one. This should solve the problem.

If you need further assistance, just let me know.

Jim

Jun 30, 2009 | Ryobi 15" Electric Factory Reconditioned...

1 Answer

CS30 Ryobi trimmer dies when I press throttle!


Yes. You just need to do a simple carburetor cleaning. Disassemble the carb. and spray with carb. cleaner. Make sure the small screen is in carb. is free of debris. Use a Den Tek Brush,(http://www.dentek.com/shop.php?target=products&product_id=7), to clean the small portals in the carb.
If you need further assistance, just let me know.

Jim

Jun 07, 2009 | Ryobi 15" Electric Factory Reconditioned...

Not finding what you are looking for?
Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned Logo

Related Topics:

2,100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ryobi Garden Experts

Nick Olsen

Level 2 Expert

183 Answers

Rexter1

Level 2 Expert

40 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Ryobi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...