Question about Nokia Ck - 7w Bluetooth Wireless Hands - Free Car Kit

Open Question

How to re-pair my iPhone having pressed forget this device

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have an iPhone 5c and will not pair with my blooth tooth connect in my 2008 tiburon. Any suggestions? Thank you

make sure your phone is up to date, reset all settings but first back up your phone, turn bluetooth off than press home and power button at the same time till apple logo comes on and lastly get your phone to "forget the device" hope these help.

May 18, 2015 | iPhone 5c Cell Phones

1 Answer

How do i pair blueantst3 with iPhone

On the iPhone, go into setting, then Bluetooth and select find new devices. On the BlueAnt, put that into pairing mode- Press and hold the green button on the BlueAnt until lights on the device blink red and blue.
When you see BlueAnt on the list of devices on the iPhone, select that. The code is 0000 and then it should pair.

Aug 18, 2014 | Apple iPhone Smartphone

2 Answers

Cant pair my iPhone with jabra sp5050

forget the headset
turn bluetooth off
turn the headset device off
reboot phone.
try again

Mar 04, 2014 | Jabra A320s Bluetooth Wireless Adapter

1 Answer

How do i pair my uniden un127 to my iphone

same to all BT devices
first turn the Device ON and make sure it's ON searching for the Iphone to pair with.
secondly IPhone >> Go into settings >> bluetooth
and search for your device (uniden)
press on the device to pair with and enter the pass code if you were asked to do so
wait few seconds till the devices negotiate and setup the session and thats it Your Done !

Jan 26, 2014 | Radio Communications

2 Answers

How do you reset bluebuds x ?

Go into the Bluetooth settings of your device and remove the headphones (forget them)

Power on headphones; press vol + & vol - to enter pairing mode (alternating red-green lights flashing); press and hold vol + & vol - for 8 - 10 seconds until the light flashed orange; the headphones are now reset to factory defaults; pair the headphones to your device.

I have to do this every time I install an IOS update on my iPhone.

Oct 20, 2013 | JayBird Gear LLC BlueBuds X

1 Answer

I told my Iphone to forget a bluetooth device, how do I get it back because it won't pick it up on my phone anymore?

First thing you need to do is to go into your Bluetooth settings and make sure that your phone is set up to pair with a device. Next, make sure that the device your are pairing to your iPhone, is in pairing mode. After both of these steps are complete, the phone should recognize the device and you can complete the pairing process. Hope this helps!

Jan 12, 2013 | Apple iPhone Smartphone

1 Answer

IPhone not pairring with parrot ck3100: I pressed "forget this device"

remove other paired devices on your device, may be the device has crossed the limit of phones it can connect.
start pairing fresh on both devices- phone and bluetooth device.,

Jun 06, 2017 | Apple iPhone 4S

1 Answer

Cannot pair S305 to iPad 2

If you have the headset paired w/ another device, you have to "forget" it on that device and then try to pair w/ the iPad.
I was having the same issue w/ new iPhone 4, but this solved it for me. It is a bit annoying to have to forget and unpair every time you want to switch devices, but oh well.

Apr 02, 2011 | Motorola Mobility S305 Bluetooth Headset

1 Answer

By mistake I touched "Forget

Remove the device from the computer, and remove the computer from the phone, then start over and try to pair again

Mar 02, 2011 | Apple iPhone Smartphone

1 Answer

Can not get caller Id or auto answer on my Iphone I had it for awhile then stoped working.

The device does not have its own integrated text to speech or caller ID, auto answer may have been removed by apple in a firmware update. I would try a complete reset repair, forgetting the paired device from the iphone. Power cycling the iphone, then resetting the V1 by pressing the vol -/+ and MFB all at the exact same time. Ensure the buttons are NOT held simply clicked all at once like a mouse to a computer, when you get a consistent rapid flash the device has been reset and will go automatically into pair mode. Then go back to settings/general/bluetooth on the Iphone and repair the device to see if that fixes the issue.


Oct 09, 2010 | Blueant V1 Bluetooth Headset

Not finding what you are looking for?
Nokia Ck - 7w Bluetooth Wireless Hands - Free Car Kit Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides