Question about Computers & Internet
Hi just bought the tech view 4 Chanel h.264 And powering up red light flashing for awhile now not getting any signal to the tv monitor? Help please
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I love it when people provide so much information such as the make and model of the DVR and the ISP. Makes it easy to figure out the problem, which in this case is most likely the ********* who is asking the question.
Posted on Apr 05, 2009
Probably a handshake problem with the cable box. It is common for cable boxes to have HDMI handshake problems. Hook the box up using the component cables and you should be fine
Posted on Oct 18, 2008
I had the same problems that most of you have been having, tv turning on and off, lights flashing in all different colors, having to unplug tv to reset and all of that good stuff. I noticed that most of the time this would happen once the tv would start to heat up, and I could hear the fan working a little harder. Well I am not an electrician but It was very simple to unscrew the lower bottom park of the tv, where the fan and most of the electronics sit, then I used an oxygen tank ( I work for a medical company ) to blow out all the dust in the tv, ( you can olso use the compressed air use for computer, but if grandma or grampa have some O2 laying around, it works really good, LOL. )and was very surpriced to see how dusty it was, then I removed the MAIN FAN ( you only need to remove three screws, however there's a box in fron of it, which you'll have to remove first in order to get to the fan ). this may sound a little complicated, but trust me it is not, once you have taken the fan off, clean it all the way around ( best to use a clean rag, the compressed air was not doing the job.
long story short, once I cleaned the fan and put it all back together. The TV still didn't work LOL, Just kidding, It has been working perfect for a little over a week.
If I can help in any other way, please e-mail me @ firstname.lastname@example.org
hope this helps.
Posted on Feb 19, 2009
The repetitive blinking light is a trouble code which is used to determine which series of boards may need to be replaced. How many times does the red light blink?
Posted on Aug 30, 2009
Check the fan that cools the bulb. It is directly behing the bulb. It should turn on when the power comes on. It apparently has a safety to protect your tv(and home). mine is in the process of going out. looking for online solutions as we speak.
Posted on Sep 09, 2009
Tips for a great answer:
Sep 25, 2016 | Dowson 8 Channel H.264 Cctv 1tb Hdd...
Jan 02, 2014 | CSi Speco Speco DVR-T4IP 4-Channel Triplex...
Oct 11, 2013 | SWANN Home Security
Sep 07, 2012 | Home Security
Jul 03, 2011 | Panasonic Televison & Video
Feb 05, 2011 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Nov 05, 2010 | CSi Speco Speco DVR-T4IP 4-Channel Triplex...
Jun 19, 2018 | Dell Computers & Internet
194 people viewed this question
Usually answered in minutes!