Question about HP DeskJet 6840 InkJet Printer

Open Question

Hp lasterjet 3240 won't print configuration page

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: Problem with printing business cards with HP Lasterjet 1320

If the cards are getting stuck in your printer, you first need to make sure the cards are rated for laserjet. If they are, then many times the cards don't like going through the curves of the machine. I would set them to feed from the tray on the front, which should be tray 1, and I would select them to eject out the rear of the printer, which you should be able to accomplish through the print drivers depending on what software you are using to print them.

Please let me know if you would like further assistance with this matter. Thank you.

Posted on Mar 27, 2009

  • 313 Answers

SOURCE: hp 3005dn prints blank pages, even the configuration pages

if you haven't any error message then you may have a problem in laser shutter, check and reseat your catrtidge, or you have a problem in your DC Controller

Posted on Apr 01, 2010

Joed911
  • 4338 Answers

SOURCE: We have a new hp

I assume that you attached the two-sided printing accessory (duplexer) to your product:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01909142&cc=us&lc=en&dlc=en#N428

The duplexing has to be set in the printer's
Printing submenu

DUPLEX OFF/ON

This item appears only when an optional duplexer is installed. Set

the value to ON to print on both sides (duplex) or OFF to print on

one side (simplex) of a sheet of paper.
The default setting is OFF.


Print on both sides (Duplex) Click Print on both sides. If you will bind the document along
the top edge, click Flip pages up.

User manual:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf


Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe


Posted on Jul 01, 2011

ynogami21
  • 670 Answers

SOURCE: My HP 6500 printer stops printing at 1/2 page or

Hi there,
How is the printer connected to the computer is it over a wireless network or direct via USB?
What operating are you using?
Try reinstalling the printer driver and check if the problem would persist.
Thanks!

Posted on Sep 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp cm4540 configration device code


Not sure if you just want to print a configuration or if you have an error code. To print a configuration page
  1. Scroll to and touch the Administration button.
    1. Open the following menus:
    1. Reports

    • Configuration/Status Pages

    • Configuration Page

  • Touch the Print button to print the report, or touch the View button to view the report on the screen. The report consists of several pages.


    I

    Aug 24, 2014 | HP LaserJet Office Equipment & Supplies

    2 Answers

    Hp laserJet 1022n printing multiple copies when copies are set to 1


    Had this same problem found a working solution here http://www.tomshardware.com/forum/59912-3-1022n-printer-stop-printing.

    Just disable bidirectional support in the printer properties worked for me

    Jan 06, 2012 | HP LaserJet 1022n Printer

    1 Answer

    The logo in my print job is color Green but its coming out in color blue. what is the problem


    Check the yellow toner cartridge, printing a configuration page.

    Configuration page
    The Configuration page lists the current settings and properties of the printer. You can print a
    Configuration page from the printer or HP Toolbox. To print the Configuration page from the printer,
    complete the following steps.
    1 Press the (LEFT ARROW) or the (RIGHT ARROW) buttons to select the Reports menu.
    2 Press the button (SELECT).
    3 Press the (LEFT ARROW) or the (RIGHT ARROW) buttons to select Config report.
    4 Press the button (SELECT) to print the Configuration page.

    Yellow print OK?
    No? try print with another yellow toner cartridge (Q6002A).

    Aug 10, 2011 | HP Color LaserJet 2600n Printer

    1 Answer

    We have a new hp lasterjet 4015n. It will print two sided, but it won't flip up the back side. I have my driver set to duplex print and flip up, but it won't flip up. Is there some setting on the...


    I assume that you attached the two-sided printing accessory (duplexer) to your product:

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01909142&cc=us&lc=en&dlc=en#N428

    The duplexing has to be set in the printer's
    Printing submenu

    DUPLEX OFF/ON

    This item appears only when an optional duplexer is installed. Set

    the value to ON to print on both sides (duplex) or OFF to print on

    one side (simplex) of a sheet of paper.
    The default setting is OFF.


    Print on both sides (Duplex) Click Print on both sides. If you will bind the document along
    the top edge, click Flip pages up.

    User manual:

    http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf


    Click on this link or copy and paste the complete link into your browser.

    If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

    Thanks, Joe


    Jul 01, 2011 | HP LaserJet P4015N Printer

    1 Answer

    Jam cartrige Area


    Clear jams from the print-cartridge area




    1. Open the print-cartridge door, and remove the print cartridge.
    Figure 18: removing print cartridge





    2. With both hands, grasp the side of the media that is most visible (this includes the middle), and carefully pull it free from the product.
    Figure 19: removing jammed media


    3. Replace the print cartridge and close the print-cartridge door.
    Figure 20: reinstalling the print cartridge



    For any other Jam types Visit the following link : HP Lasterjet M1522

    Regards,
    Shrey

    May 30, 2011 | HP LaserJet M1522nf Multifunction Printer...

    1 Answer

    I have a HP Color Lasterjet 2600n when I print in blue, the printer prints a "shadow" of the letters in a pinky color to the side of the blue text.


    calibrate the printer three times then close the prionter at least 30 min.restore on factory defaults (cold reset).

    Sep 29, 2010 | Office Equipment & Supplies

    1 Answer

    I have a HP LasterJet P2015. I am trying to print multiple page PDF file documents and after one page has printed, the triangle and "!" light flashes and a print out says insufficient memory. How do I...


    Open Printer options and reduce the print quality. It is probably 1200dpi. Make it 600 and try the print again.
    You may also add more printer memory to print complex documents on highest resolution possible.

    Aug 06, 2010 | HP LaserJet P2015 Printer

    1 Answer

    How to wirelessly print to HP 2410v Photosmart printer


    This is the official how-to for network setup from HP:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00781863&lc=en&dlc=&cc=us&product=303759&lang=

    Introduction Print the network configuration page and obtain the IP address, subnet mask, and default gateway address for the printer. Printing the network configuration page
    1. Press the Setup button.
    2. Press the arrow buttons to select Network and then press OK .
    3. Press the arrow buttons to select Print Network Configuration Page and then press OK . The Network Configuration Page prints.
    Obtaining the IP address, subnet mask, and default gateway address The IP address, subnet mask, and default gateway address are printed on the Network Configuration Page


    The manual link is here:
    http://h10032.www1.hp.com/ctg/Manual/bpu70241.pdf


    Hope this helps:

    WizardRepair

    Jul 18, 2009 | HP Office Equipment & Supplies

    1 Answer

    I've downloaded the Vista driver for a Laserjet 1160, go through the add printer process, it confirms printer added successfully, but it still won't print. I've checked leads and USB ports and the printer...


    Sandra, Do you see the HP LaserJet 1160 printer listed in Start (Windows Icon) > Control Panel > "Hardware and Sound/Printers" (Control Panel Home), or "Printers" (Classic View)?If you do not see the printer listed, run the installation from the CD that came with the printer, or you can download the drivers from the HP support site at http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=410620&lang=en&cc=us&prodTypeId=18972&prodSeriesId=410618&taskId=135note: make sure you choose the correct version (either Windows Vista, or Windows Vista x64). If you're unsure, you can check by right clicking "My Computer" and selecting "Properties". Under the system category you will see "System Type" noting either a "32-bit operating system" or "64-bit operating system". If you do see the printer listed in control panel/printers, then: Are you able to successfully print a test page? (Right-click the HP LasterJet 1160 and select "Properties", then select "Print Test Page").If not, does the test page show up in the printer queue? (You can check the queue by simply double clicking the printer). Let me know what you find!- Joshua

    Jun 08, 2009 | HP LaserJet 1160 Printer

    2 Answers

    Problem with printing business cards with HP Lasterjet 1320


    If the cards are getting stuck in your printer, you first need to make sure the cards are rated for laserjet. If they are, then many times the cards don't like going through the curves of the machine. I would set them to feed from the tray on the front, which should be tray 1, and I would select them to eject out the rear of the printer, which you should be able to accomplish through the print drivers depending on what software you are using to print them.

    Please let me know if you would like further assistance with this matter. Thank you.

    Mar 23, 2009 | HP LaserJet 1320 Printer

    Not finding what you are looking for?
    HP DeskJet 6840 InkJet Printer Logo

    Related Topics:

    16 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HP Office Equipment & Supplies Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Seeker5211
    Seeker5211

    Level 3 Expert

    1089 Answers

    kakima

    Level 3 Expert

    102366 Answers

    Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...