Question about Maytag CWE4800A Electric Single Oven

Open Question

Control board for Maytag CWE1000

Board part # 570210

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Control board does not respond


The replacement control board could be defective or installed incorrectly.

Jun 28, 2016 | Maytag MEW6627DDW Oven

1 Answer

Maytag model number mew6527dds when you turn to bake the broiler comes on


The oven control board is defective--most likely the electronic control chips have been damaged and are causing a crossing of the functions.

Sep 08, 2014 | Maytag 30" Built-In Single Electric Wall...

1 Answer

Maytag 5750ADW oven problem


No you do not have the correct board most parts retailers will not accept a return for an installed part

Jan 30, 2014 | Maytag CWG3100A Gas Single Oven

3 Answers

Only some of the keys on the keypad of my oven work. I have replaced the control board (computer board), but they keys still don't work. What specific part do I need to replace?


Hello, Thank You for using FixYa. I will be helping you today.You didnt have to change the computer you need to replace the control panel. The control panel is the whole front piece which has the touch membrane on it. This is common on these units.
Thank You and please rate my answer if it was helpful..

Jun 10, 2011 | Maytag MEW6530DDS Stainless Steel Electric...

1 Answer

I have a Magtag wall oven MEW6530DDS model. The panel buttons do not work. I've had the oven about 3 yrs. Do I need to replace the control panel or control board?


The control board. As long as none of the buttons appear to be stuck. Press each button one at a time feeling for the retraction or click. If this checks good replace the control board. Here is a link that should help http://appliancehelponline.com/ovenerc.html

Sep 18, 2010 | Maytag 30" Built-In Single Electric Wall...

1 Answer

Maytag gemini oven tough controls won't work --


Check the door switch and the temperature probe. If they are ok, then the problem is likely in the control board. These boards can be rebuilt.

Jun 26, 2010 | Maytag 24" Built-In Double Electric Wall...

2 Answers

I have a Maytag in wall oven (part# MEW653ODDS). Only three buttons on the control panel are functioning (cancel, convection bake, and favorites). The oven seems to work properly, but the number of...


HI. This will be the actual control board in this case, that will be the culprit. the control board, and touch pad, are integrated. These symptoms are indicating that the key pad membrane is damaged. This will require you to replace the entire control board. Once the control is replaced, these issues will be corrected.

Nov 03, 2009 | Maytag MEW6530DDS Stainless Steel Electric...

3 Answers

Maytag wall oven Model # MEW6530DDS control panel failing


HI, unfortunately, it is not just dirt, this is a faulty touch pad that is combined with the control board. most touch pads are separate parts that are clipped in front of the circuit board but, in this case, the touch pad and control board are one piece. You will need to replace the entire control board in this case. the touch pad is faulty.

Jun 03, 2009 | Maytag 30" Built-In Single Electric Wall...

2 Answers

Maytag oven calibration


Maytag single built in oven model cwe9000bcb beeps intermittenly. Reset stops for about 1 minute. Two control panel boards replaced since 2002 with same problem. Can it be fixed?

Dec 18, 2007 | Maytag CWE4800A Electric Single Oven

Not finding what you are looking for?
Maytag CWE4800A Electric Single Oven Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you a Maytag Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...