Question about Computers & Internet
In my answer I explained how to find his manual on the Intel Support Site. Afterword It appeared that I didn't know what board was being asked about. Feel free to simply del. the entire answer if appropriate. Thanks J. Olsson
Your board number is near the pci slots or cpu socket area like me know and will get you they ok jim
Posted on Jun 09, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi - You can download the manual from the link underlined in blue below:
See page 43:
Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!
Posted on Jul 29, 2008
Hello davideiker1, the Intel D845GRG MB manual is shared with another Intel board. (D845GBV MB). Go to this Intel site & download the D845GRG manual; http://support.intel.com/support/motherboards/desktop/d845grg/sb/cs-008873.htm You'll need Adobe reader to view the manual. Download Adobe from this link; http://www.adobe.com/products/reader/
See page 9 for motherboard layout.
The front panel connectors are shown on page 68, see item C.
On page 69 is, Table 31 shows the pin assignments for the front panel header. Front Panel Header (J9G1).
Pin 1 is power for the hard disk drive led, pin-3 is negative for the hard disk drive. Wire colors coming from the case are important. Look at all of the front case wires. The common color for each 2-pin connector will be ground. In most cases the ground wire is white, except for the internal speaker. Ground for the speaker is normally black. (This motherboards speaker is built into the MB, no hook up is needed).
Pin number 2 is positive for the case power led which lights up as green. Pin 4 is negative for the power led.
The reset switch is a bit different. Pin 5 is negative & pin 9 is positive, however if your case uses a two pin connector than connect pin 7 as ground & pin 9 for positive. The On/Off switch, pin 6 is positive & pin 8 is negative.
If this manual is not what you see on the MB, please advise.
Good luck davideiker1!
Need more information/questions post here.
Thank you for using FixYa.
Input, comments are welcomed.
Posted on Jan 22, 2009
Tips for a great answer:
Jun 11, 2011 | Whirlpool Washing Machines
Please, please please, when you ask a question, give as much detail as you can.
To get good answers, you HAVE to ask GOOD questions!
I know you are sitting in front of your exercise bike, and you want a manual for it, but it is no good putting a question in the category of exercise bikes and just write
'I need a manual'
This happens time and time again. It doesn't even matter if the partial image in the category is
If you are asking questions about vehicles, or anything that may change on a yearly basis, please also include the year.
Today, a young fella posted 'I need an assembly diagram'. I posted an assembly diagram for an exercise bike. He responded "you gave me details on an exercise bike, I want a diagram for a Co2 BB Air-rifle ". You see the problem :>)
If you do post something really vague, don't be surprised if I have some fun with you!
on Oct 29, 2015 | Cars & Trucks
Oct 21, 2010 | Washing Machines
Sep 04, 2010 | Asko 24 in. 1805 Built-in Dishwasher
Dec 19, 2009 | Kenmore HE2 Plus Front Load Washer
Dec 08, 2009 | Computers & Internet
Oct 05, 2009 | Vacuums
Apr 21, 2009 | Audiovox FM Modulator EA FMM100A
Apr 13, 2009 | 1994 Nissan Quest
Feb 20, 2009 | Zephyr Kitchen Ranges
76 people viewed this question
Usually answered in minutes!