Question about Frigidaire Affinity ATF7000E Front Load Washer

Open Question

My Frigdaine Affinity FAFS4272LAO dose not fill all the way

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model FAFS4272LAO. How do I replace the vent latch?


Try here: You can see the schematics, and manual here: http://www.searspartsdirect.com/frigidaire-parts-washer-parts/model-FAFS4272LA0/1428/0153200.html?searchType=modelSearch&prst=&q=FAFS4272LAO&searchTerm=FAFS4272LA0&shdPart=

Sep 01, 2015 | Washing Machines

1 Answer

FRIGIDARIE AFFINITY WILL NOT FILL UP WITH WATER ALLTHE WAY


Hello Carl Kjonaas - Is the house valve(s) fully turn on? Typically when water is not filling completely, the washer could possibly have a faulty switch that does not allow the valve inside to turn or a kinked fill hose. Other possibilities of more potential serious issues are water valve faults, faulty control board, pressure switch or wiring failure. If I was in your position, I will personally consult a professional to move forward accurately and assist with the repairs.

Feb 19, 2013 | Frigidaire Affinity ATF6000F Front Load...

1 Answer

My frigidaire affinity front load washer ATF6000FS1 wont fill with water


Hello hitman43 - Are the house valves turn on fully? Most common cause is a faulty switch that doesn't allow the value inside turn or a kinked fill hose. Other possibilities can be water valve faults, faulty control board, pressure switch or wiring failure. Contact a professional to move forward accurately.

Jan 01, 2013 | Frigidaire Affinity ATF6000F Front Load...

1 Answer

My washer is filling with water when i'm not using the machine. I read somewhere abot some wort of inlet vavle needing to be replaced?


Unplug the machine. If it still fills with water then mechanically the water valve has failed. If it don't fill while being unplugged then something in the control is doing it, might be the main control is bad. Who knows?

Affinity Service Manual

Jun 25, 2011 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Affinity ATF7000E Front Load Washer: where do i find what efo means on my affinity wash...


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 16, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Error code ESE


This is a problem whith your speed controll replace the the speed controll in the bootom of the washer

May 24, 2009 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Fabric softener dispenser fills with water after every load


your overfilling it at start up ,,and its sphioning down only fill to metered line...and theres always alittle water in dispencer to keep it from sticking ,,but just a little..onthejob

Jan 31, 2009 | Frigidaire Affinity ATF7000E Front Load...

Not finding what you are looking for?
Frigidaire Affinity ATF7000E Front Load Washer Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...