Question about Sewing Machines

Open Question

Singer touch tronic 2010 memory machine. The bobbin casing won't turn. I have cleaned and wiped it taken it apart and put it back together and still won't or grab the bottom thread

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: bobbin case is disassembled. how do I put it back together?

It should be in your manual.... but if you don't have one, I'm gonna try this out. I don't know the official names, so bear with me.

0e32874.jpg

There should be two plastic arm-lookin things that are turnable. Make sure these are turned outwards.

44a455e.jpg


You should have three silver pieces. The one you need first is a half-moon looking thing with a knob comin out of the middle. (it also has some holes in it)

1b56518.jpg

If you turn the big knob on the right hand side, there should be a moving piece on the inside of the bobbin case.

9f56fa0.jpg

The half moon needs to fit in with that piece. Don't force anything cause we don't want the machine to break. >< The knob thing needs to be facing the outside, otherwise it's not gonna go in at all.

4c32e5e.jpg

Once you get the half-moon thing in there, you have two more left. There's a big circle. WOO! CIRCLES! ANYWHO, The big silvery circle.. it has a knotch in it, and a little pokey-outie thing comin' out of it.

61f6c9e.jpg

It needs to be positioned so that the knotch (on the inside of the circle) is up and the pokey-outie piece (on the outer side of the circle) is on the bottom. On your machine, there should be a place where the pokey-outie piece would fit perfectly into a little hole-type-thing. Put it in. :O

297f9a7.jpg

Now it's time to move those little black plastic arms towards the center. On your circle, there should be little grooves that they fit right on top of. ^_^

bb79c5d.jpg

The only silver piece left should be the actual bobbin case deal. This should be a smaller circle with a movable arm and a silver thing pokin' out of it. (I told you, I'm bad at names!) Before you put this guy in, we need to have your plastic bobbin threaded. (I'm assuming this has already been done, correct me if I'm wrong.... they also have pre-threaded bobbins for sale, but hey, whatever works.)

f756bb2.jpg

Your bobbin needs to fit inside this last piece. (my first bobbin didn't, and I freaked out and ran to my dad... LOL) You need to make sure there is a trail of thread coming out of your bobbin that's about two to three inches long. Place your bobbin in the silver guy and there /should/ be a little niche where you can play with the thread and pull it through the silver guy's parts. (Your thread may break, don't worry, just try again)

5ec5f6a.jpg

When you move the thread around, it should come out where the little arm that sticks out is. Keep the 2-3 inch trail goin' on, you'll need it. Remember that first half-moon silver guy? Well, we're gonna stick our little assembly onto his pokey-outie piece.

ed83178.jpg

The silver arm-thing on our assembly needs to go into the knotch that's in our circle, and push in so it clicks. (Sometimes mine clicks twice...) Make sure you have that trail of thread, and go ahead and flip the white plastic up, because you're DONE assembling it.

a3c219b.jpg

I'm going to assume you have your top thread in already (again, correct me if I'm wrong..) make sure that your top thread is through the hole in the needle, otherwise we're thoroughly screwed. Pull that thread until you have another 2-3 inch tail, and twist the big white knob on the right side of your machine (same one as before...) TOWARDS you. KEEP HOLDING your top thread, otherwise it'll disappear into the abyss that is your bobbin assembly.

549cb5e.jpg

When you turn the knob towards you, your needle should dip down into the abyss and come back up- with your bottom thread! HUZZAH! it SHOULD be a loop around your top thread. (I'd use contrasting colors for practice.. so you know what it'll look like)

716685d.jpg

The manual says to "grab the bottom thread" but seriously, I can't get me fingers down in there, so I just slide some scissors under the foot and between the two sides of the loop, and just slide 'em left. usually works just fine. Unless my tail for the bottom thread is too short, cause then it'll be hard to grab. You should be good to go!

2b8b82f.jpg

I know this is pic heavy and kind of long, but I like to provide as much info as possible! Let me know if it helped!!

Posted on Jul 31, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for manufacture date/place for singer touch tronic 2010 serial number A3195D122


If you contact Singer, they may be able to provide you with that information.

Quote...

"I have a Singer Touch Tronic 2010. Though not a 2001, this machine was purchased for me by DH for Christmas in 1983. It is now 28 years old and sews like it did when new. I have had this machine serviced three times in all those years and not because anything needed repair, just to have it properly cleaned/oiled. It probably has several million miles on it. Back then I made a new outfit for work every week. I knew it should have been serviced more than that as I used it constantly. At one time, it was my only machine for eight years and since I sewed constantly, I couldn't bear to be without it for any length of time. Now that I am older and wiser (LOL) and have five sewing/embroidery machines including this one, I'm more attentive to the machines getting serviced on a regular basis. This machine aside from having sentimental value since DH purchased it, is still my favorite for regular sewing. It makes a great single chain stitch by placing an attachment in the bobbin that my newer and much more expensive machines don't/can't do. It is now at our week-end home and I smile every time I sew on it.

I agree with the advice to go ahead and use it and see how it performs, but not to put too much money into any repairs if it should need them.

Barb"
from beginner question about old machine Singer Touch Tronic 2001

Jan 02, 2017 | Singer Sewing Machines

1 Answer

Do Singer Touch and sew replacement bobbins from JoAnn fabrics fit my Singer touch-tropic 2010?


The part number may answer your question:

Bobbins 10pk Singer 181551

The bobbins I pulled up for JoAnn's site, does NOT say the bobbin fits your model.

Singer Touch Tronic 2010 Owner Manual Page 5

...

Nov 19, 2016 | Singer Sewing Machines

1 Answer

Noisy Singer Touch Tronic 2010 sewing machine


the noise could be from the needle /hook timing, or bobbin carrier
take it to a service center for a service and to find out the worn/ loose parts

Dec 21, 2015 | Singer Sewing Machines

1 Answer

Singer touch tronic 2010 only sews in reverse


Here is a link to the owner's manual.
http://www.manualslib.com/manual/154331/Singer-Touch-Tronic-2010.html

Was this running ok, the poof?
There might be a reverse option on one of the selections switches.
If it has sat for a while, it might need servicing; gummed up inside.

Feb 05, 2015 | Singer Sewing Machines

1 Answer

Bobbin will not load on a singer touch-Tronic 2000


Please check the bobbin tension or you bought a new bobbin and case otherwise check the timings.

Jan 31, 2014 | Singer Sewing Machines

1 Answer

Bobbin stitch is loopy


4 is the "middle of the road" tension number, but it depends on the thickness of your fabric.

Jun 15, 2009 | Singer 132QRFB Mechanical Sewing Machine

1 Answer

Installing the hook and bobbin assembly.


The plastic bobbin case should sit on top of the raceway, it should slot in quite easily, once the bobbin case is in put the small metal clip at the top over to hold it in place.

May 27, 2009 | Singer Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...