Broken plasma tv screen.....nec model

Paul, Check the attached links, not much on this power supply.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
NEC TV Power Supply Board

NEC Plasma TV Repair Part Number Guide for NEC Hitachi Fujitsu Plasma...

Repair KIT Capacitors FOR NEC Plasma TV P506Y1 FOR Power Supply Ypsu J011A...

REPAIR SERVICE FOR POWER SUPPLY BOARD OF NEC 50XP10 50 PLASMA TV

you might try Pioneer parts/support

http://www.pioneerelectronics.com/PUSA/Support

you will need the part# from your panel. Pioneer makes the panels. If you do find the panel don't be surprised at the cost of it. Could very well exceed the cost of a new TV.

I recommend you shop for a new TV.

The only way to fix this is to replace the plasma panel itself. This is usually a very expensive repair. WIthout the model number, I can not get you exact costs, but the panel typically will cost almost as much as a replacement set. If you'd like more details, please update this with the model number and I'll try to get the part number and cost.


Thanks,
Dan

A plasma display is a very expensive part to replace. When the plasma display is broken, the tv is usually not worth repair.

Call Nec at the number listed on the owner manual, and ask a quote on part or repair.

Regards.

The display panel is the majority of the cost of a plasma set, and the cost of installing a new panel makes repair uneconomical. If this set is being used in a commercial environment, maybe you have some kind of insurance that might cover replacement.

my esa plasma tv model pdp 4294lv1 has sound and i can switch the tv channels, but the color is blurrier

Dear Sir,
I have NEC 42vR5 HW Plasma monitor, this plasma goes off with in 1 Minute, pls. give solution



thanks

pramod

SoCalRugger,
The plasma usually has 2 sheets of glass, the outer one sounds ok which is not good news as these can be replaced.
The inner panel is the actual plasma layer and if it is craked or broken it usually requires a swapout for a new panel.

I need one too
[email protected]

Something in the path to drive the other half of the screen has failed or is broken. Need some basic troubleshooting information in order to be any more specific, but I've seen this problem before with NEC plasmas. If still under warranty better use it Good luck