Question about NAD C370 2-Channel Amplifier

1 Answer

Low base in one channel - NAD C370 2-Channel Amplifier

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 119 Answers

The problem is most likely in your speaker. I have repaired hundreds of amplifiers and have never seen this problem in newer amps. Try swapping the speakers and see if the problem moves. This will prove that the speaker has a problem.

If it is an older amp, the problem may be the coupling capacitor between the amplifier output and the speaker terminal. These do go bad, and as the capacitance drops, there is a loss of the low end. I have seen this a few times, but it is not a very common problem.

My bet is the speaker is defective.

Posted on Dec 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both mini speakers are playing, but not getting any sound from the base box.... what might be happening?


The mini sub woofer's amplifier is not working but the other amps powering the left and right channels are ok.

Nov 28, 2013 | Klip Xtreme KSS-710 2.1 Stereo Speaker...

1 Answer

Turn up power on cobra 200gtl


rv9 for hi power and rv8 for low.hi would be around 32 w and low around 4.

Aug 31, 2013 | Cobra 200 GTL DX 4-Channels Base CB Radio

1 Answer

Low pwr on xmit,weak rec,swr alert lite on xmit swr 1:4-1 on ch 20


you have no power because your radio is not tuned to your antenna.You get a new radio and put junky coax and a decent antenna and you expect it to work right. Get 75 ft of rg-213 and you will see a change.

Jan 08, 2013 | Galaxy Radios DX-2547 40-Channels Base CB...

1 Answer

How do i get to low and hi band


there are 2 band switches. one is a rotary switch and one is a slide switch. the rotaryhas a/d e/b and f/c. the band high low switch will determine weather the first position is d or a.so there are a total of 6 band switches. I can't remember witch band is cb band. I recommend getting a frequency counter so you can see what channel you are on. 27.205 is channel 20.

Aug 04, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

How do you turn on the low channel if you have a midland 77-285A


Hi my name is John. Welcome to FixYa. Turn the big dial to 26.965 thats channel 1. Thanks for choosing...John

Nov 25, 2010 | Midland 1001Z 40-Channels Base CB Radio

1 Answer

How do you set regular channels and low and high on a connex 3300


Combination of hi / low switch and the band knob, I believe C band with the switch on low will give regular channels.

Jan 10, 2010 | Connex 3300 240-Channels Base CB Radio

1 Answer

Nautico 1 keeps going to channel "1a"


Found out it was a low battery. We had charged it for several hours, but it was apparently low. It is supposed to show the low battery symbol, but it never did. We put it new AA batteries instead of the power pack and it worked just fine. Thanks

Jan 25, 2009 | Midland 79-290 120-Channels Base CB Radio

2 Answers

Fresh install SWR will not come down


have you checked the coax connectors? It's gotta be a bad connector,damaged coax or a defective antenna. Careful--don't test "too much" or you'll burnout the final amp!

Dec 27, 2008 | Connex 3300 240-Channels Base CB Radio

2 Answers

Uniden washington base station


I need the wireing information for uniden washington CB radio,thank you.

Oct 28, 2008 | Uniden PC78ELITE 40-Channels Base CB Radio

Not finding what you are looking for?
NAD C370 2-Channel Amplifier Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top NAD Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a NAD Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...