Question about Sewing Machines
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: buttonhole problem
When doing the button hole....after installing the button hole foot and lowering the foot....and adding the button so the automatic button hole size is determined...you lower the button hole lever it will touch the back of the button hole foot. this holds the button hole foot in the proper position...if this lever is not all the way down...the machine blips at you...check to see that it is down all the way...I hope this helps you..It truly does all that it advertises and is a great machine...BBill01
P.S. you can adjust width and length of the stich also...see instruction manual. pg 28-30
Posted on May 30, 2009
if the machine regular needle threads front to back NOT side to side, you can use a double needle. simply pass both threads thru all the same slots (thread one at a time so they don't get twisted up) then just before the needles, leave one out of the thread guide just above the needle. you may have to loosen the top tension SLIGHTLY, like a half number. and do NOT use a zig zag stitch without first hand cranking it thru the cycle to be sure the needles clear, or you'll make a 5.00 mistake (the cost of the double needles!)
Posted on Jun 16, 2009
Tips for a great answer:
Jan 10, 2018 | Sewing Machines
Sep 29, 2017 | Juki Sewing Machines
Dec 22, 2015 | Juki Excite Hzl-g210 Computerized Sewing...
Dec 01, 2015 | Juki HZLF300 Sewing Machine
Oct 27, 2015 | Juki Sewing Machines
Feb 14, 2015 | Sewing Machines
Dec 30, 2009 | Juki HZL-E80 Computerized Sewing Machine
Apr 22, 2018 | Janome Sewing Machines
26 people viewed this question
Usually answered in minutes!