Question about Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is normally a signal that is for a control fault. you will need to pull the power and shut this unit down for 5 minute.. if the unit continues to flash after this reset, you will need to replace the control board/timer in this case. it has failed.
Posted on May 22, 2009
If you spin the drum by hand, and it is niosy and rumbling then the main drum bearings have failed.
If under 5 years old, then you should be able to get it repaired under Hotpoint 5 year guarantee, You just pay for labour and call out, cheapest option, it is not really a D.I.Y job, as it is quite involved, and entails a lot of work.
Please rate my advice.
Posted on May 27, 2009
Filtet access at the rear of the machine behind access panel, Remeber to remove the plug from the socket before removing the rear panel
Posted on Jun 10, 2009
F02 and F08 are 2 completely unrelated problems.
F02 indicates motor problem, and F08 indicates a problem with the heater circuit, the relay is not energising, possibly due to a faulty heater or themistor.
Would advise you call a qualified repair technician.
Please rate my solution.
Posted on Jul 23, 2009
Tips for a great answer:
Nov 22, 2016 | Hotpoint Washing Machines
Jun 19, 2016 | Hotpoint Washing Machines
Jan 23, 2012 | Washing Machines
Nov 11, 2009 | Hotpoint Aquarius WF000 Front Load Washer
Oct 06, 2009 | Hotpoint Aquarius WD640 Front Load...
Oct 04, 2009 | Hotpoint Aquarius WD63 Front Load...
Sep 06, 2009 | Washing Machines
Nov 26, 2008 | Hotpoint Aquarius WD640 Front Load...
Feb 12, 2008 | Hotpoint WD62 Front Load Washer / Dryer
13 people viewed this question
Usually answered in minutes!