Question about Computers & Internet

1 Answer

Tutorial asus I loosened the screws and I opened the laptop body but it may loosen enough to remove HDD

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 94 Answers

If you want to remove HDD, make sure all the small screws are loosened up in order to remove the HDD. Please check with manual of the laptop, it should show locations of the screws.

Posted on Jun 04, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Dell Inspiron 1000 Disassembly

The teardown information from rbrown67 was very accurate and easy to follow. It helped tremendously in tearing down my machine to replace the AC plug.

Posted on Mar 26, 2008

shaky120
  • 310 Answers

SOURCE: hi..samsung r40 power jack ..how do i remove

hey, dc jacks are always a nightmare to replace, ie i guess you want to replace it, you actually need to remove the motherboard in the machine so you need to remove all screws on the bottom of the laptop, then remove the keyboard, and you will find more screws under there, and you will have to remove screen etc to gain access, ie everything needs to come apart to get into them. and once its apart you will have to unsoldier the old dc jack and resoldier on the new one, if you aint good at soldiering i wouldnt recommend doing it yourself.

Posted on May 28, 2010

igor106
  • 277 Answers

SOURCE: How is the memory cover removed from this laptop?

Once you remove the two screws all you need to do is force open the cover. It has two "fingers" that hold the cover in place even if you remove the screws. This is a security feature to make sure that your RAM is safe even if the screws are missing.
Take a flat head screwdriver (or a knife with a pointy tip) and lift up the cover placing the screwdriver/knife between the two screws.

If this was informative and helpful please vote with a Thumb Up. Thank you.

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Tutorial asus


flip down your Laptop and look for your HDD compartment usuall located on the opposite side of the exhust fan a rectuangual cover is visible with 4 to 6 small screws on it.

May 09, 2014 | Computers & Internet

1 Answer

Describe in detail how to open up a electro mate 400 B&D


  1. Unsnap the black plastic tray on the bottom. Turn the unit face down. Loosen four screws along the bottom edge.
  2. Loosen two screws in the handle and one screw on each side.
  3. Use flat blade screwdriver to pry up black rubber bumper near the top (back side only) and loosen one screw underneath on each side.
  4. Open the flat panel, remove any contents and loosen two screws at the back.
  5. With all 12 screws loosened turn unit face up with bottom toward you and gently pry bottom apart. There are wires and tubes connected inside so just prop it open enough to work.
  6. Replace battery ($29 + shipping on Amazon, search on battery model like CB19-12 or EXP1218).
  7. Reassemble.
  8. Tell spouse you just saved $150; collect reward.

Sep 17, 2013 | Black & Decker 400 Watt Electromate With...

1 Answer

Changing HDD in Asus U31JC


remove the rubberfeet at the bottomcase. remove the ram-door (bottomcase-cover). open the keybord and touchpad-locks. Remove the bottomcase-screws. remove the whole topcover by using a thin plastic-pen, push it gently in at the edges all around the topcover and lift it up. And there's the HDD.

Aug 12, 2013 | ASUS U31JC-A1 13.3-Inch Laptop (Black) PC...

1 Answer

How do i remove the hard drive from a canon imagerunner 3570?


On the back of the machine there's a small panel on the top-right hand side,
There are 4 screws: Loosen but do not remove the two bottom screws,
remove the two top screws. You can then lift the panel upwards to remove it.

You are now looking at the main PCB and also the HDD,
The Hard Drive is secured to the board by 2 screws,
remove the screws and the remove the HDD by sliding it to your left.

If you need pics let me know.

May 31, 2011 | Computers & Internet

1 Answer

How do you replace the front amber running light in a 2008 GMC Acadia


Turn off engine and open the hood
Remove the front wheelhouse liner. Whichever side, say we begin with the front left(drivers). If you dont wish to remove the front left tire, just turn the wheels far to the right to gain enough clearance. And you dont need to remove the whole liner and all the screws and retainers. . Just remove only those nearest the headlight and front bumper area in order to loosen the front half portion of the wheelhouse liner. Just enough for your arms to reach inside.
At this point, try to reach in for the rear of the running lamp. Work your hands inside to remove the lamp from its socket. Note the position before turning and pulling it out.

Note: If you still need more clearance for better access, you can (1) remove the tire. or (2) remove the 3 screws that secure the bumper to the body, and then pull outwards to loosen.Try to reach in again.
Just need some patience, though. goodluck. okay? : )

Jan 14, 2011 | 2008 GMC Acadia

1 Answer

I can't see my wifi in my aspires 5534


Removing the WLAN Board (Wireless LAN)
1. Removing the Battery Pack
2. Loosen the two captive screws in the HDD Cover.
3. Lift the HDD cover up to remove. Use the finger tab to release the six clips securing the cover in place.
NOTE: The HDD is also located under this cover.
4. Disconnect the Antenna cables from the WLAN Board.
NOTE: Cable placement is White to the AUX terminal (right) and Black to the MAIN terminal (left).
Chapter 3 57
5. Remove the single screw securing the WLAN Board in place.
6. Remove the WLAN Board from the Mainboard and check if its properly fixed well and refix again ensuring its firm.

Dec 27, 2010 | Acer Aspire 55345410 Notebook

6 Answers

Doors where hard to close without the weather door seals. But with them on they will not close. The body plates more but not enuff on the cab? I need HELP.


Hi!!
The doors Hinges or Striker need to be adjusted to make up for the weatherstrip thickness. To do this, loosen the hinge-to-door bolts for lateral adjustment only. Loosen the hinge-to-body bolts for both lateral and vertical adjustment.
FRONT DOORS 1kbron_78.gif
REAR DOORS
1kbron_79.gif
BEFORE YOU START:
  • Determine which hinge bolts are to be loosened and back them out just enough to allow movement.
  • To move the door safely, use a padded pry bar. When the door is in the proper position, tighten the bolts to 19-25 ft. lbs. (26-35 Nm) and check the door operation. There should be no binding or interference when the door is closed and opened.
  • Door closing adjustment can also be affected by the position of the lock striker plate. Loosen the striker plate bolts and move the striker plate just enough to permit proper closing and locking of the door.
TO ADJUST ON A: F-150, F-250, Expedition and Navigator
HORIZONTAL AND VERTICAL ADJUSTMENT
  • Loosen the front door hinge to front door bolts.
  • Adjust the front door alignment.
  • Tighten the front door hinge to front door bolts to 19-25 ft. lbs. (26-35 Nm).

FRONT DOOR FORE AND AFT ADJUSTMENT Check the rear door hinge adjustment before adjusting the front door hinge.
  • Remove the front fender.
  • Loosen the front door hinge to body bolts.
  • Adjust the front door alignment to specification.
  • Tighten the front door hinge to body bolts.
  • Install the front fender.

1999-00 F-Super Duty Models
DOOR ADJUSTMENT The following procedure is for performing fore, aft, up, down and tilt adjustments.
  • Remove the door striker.
  • Loosen the bolts only enough to allow for slight door movement.
  • Carefully close and adjust the door until flush with the adjacent body panels.
  • Carefully open the door and tighten the bolts.
  • Re-install and adjust the door striker.
  • Check the door for proper operation and alignment.
STRIKER ADJUSTMENT Mark the position of the striker before loosening.
1kbron_48.jpg
  • Loosen the striker retaining bolts.
  • Adjust the door striker and tighten the striker retaining bolts.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Dec 09, 2010 | Ford F Cars & Trucks

2 Answers

The chain popped off and I can't get it to fit back on.


Losen the bar mounting nut, then losen the chain tension adjustment screw until the chain can be reinstalled, then tighten the tension screw until the chain just sags 1/8" or so at the center of the bar then retighten the bar mounting nut.

Sep 10, 2009 | Remington 16" Electric Chain Saw

1 Answer

Need to pull the hdd


if it's the harddisk you want to remove,
you will have to unsrew the screws at the pc's back, remove the panel and unplug the power cable(4 cords)first and then the data cable(gray, flat one second) from the harddisk.
be careful not to remove the dvd/cd-cables
now loosen the screws of the harddisk,
take out the disk, gotcha!

Aug 04, 2009 | Computers & Internet

1 Answer

Hard Drive


There is usually a small coer you have to remove, held by a couple of screws. It should have a HDD symbol on it; it usually looks like a small barrell.

After you remove this cover there may be one or two more screws holding the HDD frame, and after you remove these you should be aole to pull the small frame with the HDD out. There is usually a small plastic tab you can pull to get it out.

You then have to loosen the existing drive frmo the  frame, replace it with the new one and slide it in. replace all the screws, and you're done.

Nov 07, 2007 | Acer TravelMate 507T Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...