- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you mean that you want to toggle the unit to TEL or TAD Mode? When there is no document in the feeder, press the Resolution/Reception Mode button to toggle between the FAX, TEL and TAD modes. The Resolution/Reception button is at the top of the row of buttons to the right of the number pad. There is an arrow that will point to the current setting in the LCD window. (It points up for the TEL and FAX modes.) The TAD mode is only accessible if you have set the out-going message. (If there is no out-going message, you toggle between FAX and TEL.)
Press the c/Mute button (Has a tape logo on it)
It should say either TAD ON or TAD OFF - presumably yours says TAD OFF!!
Press number 8 to switch between TAD ON & TAD OFF....
If Answer is on, you'll hear a double beep and the orange message light will come on.
press the "clear / mute" button [screen shows TAD ON] press 2 while message is playing press 0 you could cut and paste this link into your browser and you should find the manual www.cordless-phones.uk.com/userguide/vs2000.pdf Hope this helps
Background: The TAD1220 does not have a way to manually delete messages. It more or less has a FIFO(FIRST IN-FIRST OUT) method of retaining messages. It will save up to 14 minutes of messages and then they are deleted automatically after you play them back and receive another incoming call. This is important: It will only erase the messages AFTER you have listened to them *AND* received another message.
Exception: If you happen to press the STOP/SAVE button, then all of the messages will be RE-SAVED until the memory limit has been reached.
Extreme Solution: The only manual way is to remove the battery, disconnect the power cord and erase everything. You will then need to reprogram your greeting.
found my old one to switch ansaphone modes: press clear/mute to get TAD ON(or TAD OFF) displayed, then Answer + Record: TAD ON then press 7 then 1 Answer only (no msgs): TAD ON then 7 then 2 SORTED at last!! :-)