Husky 2200 - water will run through when engine not running, once running nothing, like the water isn't on. Does seem to build pressure and release through pressure valve underneath.
Hello sir, that is a on going problem with power washers the pump not working, than works sporadically. the main cause is leaving the pressure hose hooked up to the machine over a long period of ,not draining hose & machine, in the winter time the hose & pump willfreeze causing hose & pump to expand and burst. build up of calcium deposits from hard water clogging up pump nozzle,valves in the gun handle,clogging hose fittings and screens.one of these has to be your problem.you can find a parts brake down at KARCHER.COM.orRJ BOWERS.COM . and manuals,these are good info,sites,hope this helps, MrFixIt,oh could you please rate this solutions.thankyou (((
New pressure washer runs starts and runs for 30-45 minutes with no problems then dies and will not...
(More)
New pressure washer runs starts and runs for 30-45 minutes with no problems then dies and will not restart. Once it cools for a few minutes it will restart but will die again quickly. If it is allowed to sit for 30+ minutes it will run for another half hour but then dies again. Changed oil, gas, checked all obvious areas. Any suggestions?
my pressure washer is not pressurizing the water. i took the bottom assembly off the pump and there...
(More)
my pressure washer is not pressurizing the water. i took the bottom assembly off the pump and there are three spring loaded plastic pieces in there. underneath these springs is a mushroom shaped plastic piece. two of the three mushroom pieces were contorted and need to be replaced. how do i get them?
The on-off switch shaft broke on my K 2.89 M pressure washer and I can't get the broken piece out....
(More)
The on-off switch shaft broke on my K 2.89 M pressure washer and I can't get the broken piece out. Can you help?