Question about HP LaserJet CP1515n Printer

Open Question

How to fix black color too light? - HP LaserJet CP1515n Printer

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Does wearing black clothing in the sun better than color clothing, i.e. softball??


No. Black will be much warmer than white or a light colour. Black absorbs heat, white reflects it, so it is much cooler to wear white in the sun.

May 09, 2014 | Computers & Internet

2 Answers

HP Laser Jet 4700n-Light printing on right side of paper. Removed all cartridges and toner, cleaned and recalibrated after start up. Still light printing on right side. Any suggestions??


Is the light printing the same for black and white vs color? Light printing on a side is not uncommon for these printers. It is usually caused by the laser optics getting dirty. But this usually shows up more in one color than the other. Such as something printed in yellow is fine while red is faded on one side. If the light on the right side printing is the same on all colors including black then I would suspect something with your transfer unit.
If you do notice that it us just on black or another color then it is definately time to get the laser optics cleaned.

Dec 18, 2009 | HP LaserJet 4700N Printer

1 Answer

Prints color, not black. I have changed the


Please check your printer setup. from the document you are printing. Choose the printer from the FILE menu (depending on what program you are running) Printer SEtup or Properties, somewhere you will find an option, Print in color? or Black, Click on the Black., come out of the menu and then print, I am pretty sure you have chosen color.
Hope this will fix your problem.

Aug 18, 2009 | Office Equipment & Supplies

1 Answer

Double vision on color only


I like the Tech Most likely did a Color Configuration , Go into the Menu and Use the Arrow keys to scroll and look for " Color Calibration " run the test make sure you don't have " Bleeding" this is a term used by Color Tech's like myself to describe that Color are mixing together which is causing your current problem.

Do calibration First.

Mar 09, 2009 | HP Color LaserJet 2600n Printer

1 Answer

2004 Expedition Wiring Color Codes


brown would be the parking light hot wire
green / white would be the blinker hot wire
black yes ground ,
but according to the schematics , **** this color combination only applies to the left front

the right front should be :
brown would be the parking light hot wire
black ground , and a white / light blue would be the blinker hot wire

do you need the rear colors ?

brown is parking on both left and right rears
black is ground on both
light green / orange left blinker / stop light hot wire
orange / light blue right blinker / stop light hot wire

J5

Jan 15, 2009 | 2004 Ford Expedition

2 Answers

HP 932 RED LIGHT STAYS ON


The light you describe is the ink light.
When that light is blinking, try this.

Turn on the printer. Open the front cover and look at the carrier for the ink cartridges. There is a white arrow right above the latch for the color cartridge.
Once the carrier stops moving, the white arrow should be pointing to a symbol which represents the problem (the reason the light is blinking.) Examples are low ink black, low ink color, sick black ( replace ) , sick color ( replace ).

IF you have just replaced your black cartridge, you might need to replace your color cartridge too.
This printer will not work without both ink cartridges installed and full.
You cant print with a full black and an empty color cartridge unfortunately, even if you only want to print black.

Hope this helps!




Aug 27, 2008 | HP DeskJet 932c InkJet Printer

1 Answer

Not printing after color cartridge ran out - new black cartridge installed.


Yes, this printer has fixed printheads and must have ink in each color to prevent damage to the printheads. Even when printing black only each color is spit in the servicing area to keep the printhead unclogged.

Regards,
Bob Headrick, Microsoft MVP Printing/Imaging

Jul 18, 2008 | Epson Stylus C60 InkJet Printer

1 Answer

Installing


not sure w/ this one, but is it blinking too fast on printer, the check color and black ink cartridges? and if yes what is the color of the light, is it yellow or red, and is the on and off lights, flashing?
-black and color blinking fast - install printhead
-black and color blinking slow - no cartridges installed
-on and off blinking black and color steady lights, calibrate

-hope this helps, or else contact kodak
-xoxo

Apr 11, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Ink lights


You can only print in BW or Color.


You still need both cartridges...

Feb 07, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

No Color


sorry the problem is internal the color ic needs to be change,contact your tv repair technician

Jul 24, 2006 | TMI Products Vizualogic Headrest Pair...

Not finding what you are looking for?
HP LaserJet CP1515n Printer Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...