Question about Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

Hobart HD-20 home dishwasher that leaks occasionaly

I have a Hobart HD-20 home dishwasher that is leaking at the bottom left corner on the final cycle. Only leaks every 3-4 uses. Local parts man is stumped.

Posted by on

  • monomoy May 11, 2010

    hobart hd 20 get ml# to the unit and repost will look to get #

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

Ck the vac. brkr. on the back of the unit, if no vac. brkr. ck the air gap on the side of the mach. let me know how you make out.sounds like the leak occurs when mach. goes into the rinse cycle dont forget to vote thanks monomoy

Posted on Jan 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung dishwasher leaks in left bottom corner of dishwasher during rinse cycle


if it is the rear corner then you may have a leak in the drain line. take off the kick panel and see if you can tell where for sure it is leaking.

May 16, 2014 | Samsung DMR57LFS Stainless Steel Builtin...

1 Answer

Hobart lx30h leaking from bottom


This is a testing for the post on this web site, not a solution.

Mar 27, 2014 | Hobart Lx30h Commercial Dishwasher

2 Answers

Hoover Dishwasher HD95M leaks on start up from bottom right front corner. Leaks when initially being fed from water feed.


Water leaking can be poor plumbing or fault in the inlet hose connection. You are the first observer and so your view on the leak area is important as the leak can be from the hose, from the inlet, the hose or the washer unit.
Based on this the water leak can be plugged, tighten the hose clips, check the inlet filter or check the washer's feed line.

Feb 09, 2011 | Hoover HD95M Free-standing Dishwasher

1 Answer

AM14C slight leak at the bottom of the water deposit tank,


I love these machines. Keep it and fix the leak.

If you have a leak. You have to find out where it is coming from. Dripping water from the bottom of tank can be coming from a number of different places and at different times thru out the cycle. The rinse cycle or wash cycle or all the time.

The first place to check is the pump. It will leak during the wash cycle. Especially from the top gasket. This one commonly goes out.

The pump motor shaft seal will leak all the time but will drip from motor, not the tank area. You want to fix this before it ruins your motor bearings or motor.

But since you have a corner machine, the first thing to check is the rear door panel. This is were your door would be if you had a straight thru machine instead of a corner machine. It has teflon guides just like your actual doors and they do leak at times or all the time if the guides are
not sealing. IF food particles accumilate at the bottom of that panel it blocks the water from running back into machine and instead, onto your floor from the bottom of tank areas. This is anther common leak.
The teflon guides should be replaced if they have cracks in them or are brittle and flaking apart. Sometimes they slide down and can be push back up from inside the machine. In either case, you will need to clean all the crud from that back panel edge. Usually thats all I do to fix that leak is just clean it up and push those guides out to outside edge with the tip of my screwdriver to tighten the seal between them and the channel.

Hope that helps!

Jul 10, 2010 | Hobart 40 in. AM14-254 Free-standing...

1 Answer

Door of dishwasher is leaking at bottom left corner.


HI. the door seal has been compromised. it could be simply farad or slightly propped open by some sort of debris as well. check the door seal for faults. replace if faults are found.

Also, make sure the door isn't mis-aligned. this will happen over time during heavy usage. re align the door if necessary.

Sep 22, 2009 | Frigidaire Dishwashers

1 Answer

I have a very old Imperial Hobart KitchenAid home


It may have leaked some water on one of the electrical parts and made the smell. Leak could have been from a dirty gasket, so check the gasket and clean it up with just a few wet paper towels.

It could also have been a solenoid that failed and overheated, but since it went through the cycle it sounds like maybe it's okay.

If it is an electrical part, then they are not too hard to get. There are several stores online and brick and mortar that will help out.

Aug 25, 2009 | Hobart Dishwashers

1 Answer

Used hobart dishwasher


Is it a wire or hose?If you take the bottom front cover off the dishwasher do you see a booster or square water heater to the left?Can you be a little more specific?

Mar 25, 2009 | Dishwashers

1 Answer

Hobart dishwasher model LX30H; displays wrench and E4.


Water is not to top sensor in alotted time.
Top sensor is in right rear corner, and is the upper of the two. Check the connector to the probe on the outside at the back. (sometimes gets wet fro vacuum breaker leaking when dirty or low flow pressure. Machine needs 20 psi flow rate

Dec 11, 2008 | Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

Leaking at bolts at drain


you must change the gasket between bottom flange and machines underside and apply Hobart mastic to each bolts, not expensive but may require some plumbing dismanteling

Oct 16, 2007 | Hobart AM14-253 Free-standing Dishwasher

Not finding what you are looking for?
Hobart 24 in. LXIH-3 Built-in Dishwasher Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Dishwashers Experts

Jason

Level 2 Expert

211 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Garth Jackson

Level 2 Expert

93 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...