Question about Kenmore 3.8 cu. ft. HE3t Front Load Washer

Open Question

How to clean filter on kenmoreelite washer - Kenmore 3.8 cu. ft. HE3t Front Load Washer

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Fowl odor in front loader

Clean out the small holes in the gray door gasket (at the bottom) to allow water to drain back into tub. Open access door at bottom left on front of machine, use small hose to drain remaining water from machine, remove and clean out filter there. Re-install. Run washer on the tub clean cycle if you have that cycle, or if not, use the longest, hottest cycle you can, but make sure to use a commercial washer cleaner like Affresh, Washer Magic, Whirlaway hot tub cleaner, etc., with no clothes in the washer. After cleaning tub, make sure you only use one tablespoon of HE detergent per cycle, and only one teaspoon of fabric softener per cycle if you use softener.

Feb 13, 2011 | LG WM-2277HW Front Load Washer

1 Answer

How do I clean the washer pump filter in my GE-WCVH6600HGG?

please go through this
  • Examine if there's a problem with the filter. If the machine isn't draining, spinning or agitating, the washer pump filter may be clogged, and you should clean the pump filter. Other giveaways that the filter may need cleaning include the washer performing an incomplete cycle, the timer not advancing or the washer just not running

  • Open the pump access door with a coin. Remove the pump filter by turning it counterclockwise and pulling it out.
  • Clean the filter with your fingernails, removing all loose debris. Wash the filter under running water until it is clean.

  • Replace the filter. Insert it back into its housing, turn it clockwise and close the door.

  • i hope this helps you ,thank you

    Feb 10, 2011 | GE Washing Machines

    1 Answer

    Clean Filter?

    There is a filter at the rear of the washer.
    Remove lower rear panel.
    Remove large black hose from bottom of drum.
    Remove and clean filter in inside hose.
    Remove hose onto pump and check for blockage oe obstruction here as well.
    Please rate my solution.

    Jan 27, 2010 | Hotpoint -Ariston Aquarius WD645 Front...

    1 Answer

    8526055 out of balance

    There are three spings that hold the tub to the machine. You might want to check those if one or more came off.You'll have to take off the washer cover to access the spings. If one came off it is very easy to put back on. Other than that check your machine body to make sure that it is tight and secure....

    Sep 01, 2009 | Kenmore Washing Machines

    1 Answer

    KenmoreElite Dryer - beeps 2 short beeps rapidly and won't stop

    call ur local repairman.. ur board could be fried!!!

    May 18, 2009 | Kenmore Dryers

    1 Answer

    Ariston Margherita 2000 AWD12 Advantage washer dryer filter clean

    To clean filter, remove the lower plastic panel at front of washer.
    Unscrew the pump filter cover anti-clockwise to remove and clean.
    Please rate my fixya solution.

    Feb 13, 2009 | Ariston Technologies Ariston AWD12 Front...

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    27 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    Sal DeAngelo

    Level 3 Expert

    2328 Answers


    Level 3 Expert

    5546 Answers

    Ed Mac

    Level 3 Expert

    731 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides