Question about Zebra Z4Mplus Label Printer

1 Answer

My zebra z4mplus printer loads all the labels on the roll and when load the labels in the printer and turn the machine on. How can I make the printer stop loading after one label comes out?

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 51 Answers

I think your printer is set to print on Continuos media. If you use gap labels, you will need to set the printer from the menu on NOT CONTINUOS, then save the setting. In some cases the software or driver is the one who controls this setting. So you will need to change directly in the printer driver. You will find this option on the General tab (click Properties then) and Advanced tab (click on Printing Defaults). There you will have a list with printing parameters like speed, darkness, media type. Adjust as you need to fulfill your request. But first change directly to the printer, accessing the menu from control panel.

Posted on Jun 03, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: Stripe S600 Thermal Label Printer: how to load zebra stripe printer labels...

CLICK HERE to download the full user manual from Zebra. If the link doesn't work, go to Zebra.com, click Resource Library at the top of the screen, then click MANUAL. Choose your model number then follow the prompts.

Posted on Jun 07, 2010

codabar
  • 4 Answers

SOURCE: zEBRA z4MPLUS LABEL PRINTER

Do Media and Ribbon Calibration . in printer parameters

Posted on Jul 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Calibration


I think your printer is set to print on Continuos media. If you use gap labels, you will need to set the printer from the menu on NOT CONTINUOS, then save the setting. In some cases the software or driver is the one who controls this setting. So you will need to change directly in the printer driver. You will find this option on the General tab (click Properties then) and Advanced tab (click on Printing Defaults). There you will have a list with printing parameters like speed, darkness, media type. Adjust as you need to fulfill your request. But first change directly to the printer, accessing the menu from control panel. Also verify if there is no label sticked on the media gap sensor.

May 08, 2014 | Zebra Z4Mplus Label Printer

1 Answer

My label starts printing halfway down the label


hi,
1. Check the printer settings of the software you are printing with.[most
probable cause]

cause]]
2. Turn off printer.
Open the printer and remove the labels roll.Re-load it and close the printer.
Press and hold the feed button.
Power on the printer and release button after first flash of led light.
Printer will self test.
Turn it off and on again.
Now print.



good luck!

Sep 09, 2011 | Zebra Z4Mplus Label Printer

1 Answer

Labels feeding incorrectly on Z4Mplus Zebra priner


Use this link and download the quick setup guide. Page 4 shows how to properly load the labels.
http://www.zebra.com/id/zebra/na/en/index/resource_library/manuals.results.html

Aug 10, 2010 | Zebra Z4Mplus Label Printer

1 Answer

ZEBRA z4MPLUS LABEL PRINTER


Do Media and Ribbon Calibration . in printer parameters

Jun 29, 2010 | Zebra Z4Mplus Label Printer

1 Answer

My machine keeps reading


Sounds like you may have inadvertenly loaded the ribbon underneath the label sensor, blocking it, and making the printer think it's out of labels. Check the ribbon path to make sure it's loaded above the label sensor.

Hope that helps !

Apr 27, 2010 | Zebra Z4Mplus Label Printer

1 Answer

Why does the label wrap around the bar every other label I print?


Try a different roll of labels. Clean with 100% alcahol

Apr 06, 2010 | Zebra Z4Mplus Label Printer

1 Answer

My Zebra Z4Mplus printer is skipping labels when I print


check the label margins, and label dimensions, and spacing , normaly is these problem, or is a printer driver problem, try reinstall driver

Jan 13, 2010 | Zebra Z4Mplus Label Printer

1 Answer

Change label size


Turn the power off. Remove old stock. Load new stock. Turn power on. Restart your program. Form size is software controlled from your form settings downloaded into the printer before your print. Make sure you restart your software to reload them.

Sep 03, 2008 | Zebra Z4Mplus Label Printer

1 Answer

Zebra Z4MPlus Ribbon Wrinkles


I changed the print head, and the issue was solved.

Aug 01, 2008 | Zebra Z4Mplus Label Printer

Not finding what you are looking for?
Zebra Z4Mplus Label Printer Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...