Question about Bosch 30 in. NGP 732 / 736 Gas Cooktop

Open Question

Oven ignites but wont stay lit when button is released

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas burner will not stay lit. works fine when pressing knob for igniter function but goes out when knob is released


You have what we call a flame safe device fitted to the burner, (thermocouple lead), have you checked to make sure your flame on the burner is touching the tip of the "probe" on t'couple, if it isn't make sure that the ports on the burner are clear. If this does not solve problem then the thermocouple needs replacing by a Gas Safe engineer.

Oct 25, 2013 | Verona VEFSGG365SS 36" Gas Range with 5...

1 Answer

The burners light, but it takes an inordinate time for them to stay lit. One of the burners will not stay lit when the knob is released, regardless of how long you depress the knob.


Need a new fsd ( looks like a small brass pencil) for the burner that won't light. The alignment of the ignition electrodes needs looking at and there over all condition I. E broken , worn , misaligned ect

Jul 13, 2011 | Bosch PGL985UC 36 in. Gas Cooktop

1 Answer

I have a Maytag range MGR5720BDW, the oven wo't heat. When I push the oven button it doesn't release the gas to warm the oven. I don't have a parts manual and don't know if a switch for this exists. I'm...


Hi,

Just because it glows that does not mean it is not bad...
The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

Sep 03, 2010 | Maytag Cooktops

1 Answer

The oven on my gas cooker will light but wont stay lit


Thermo coupling needs changing, unless you are Gas Safe, let someone else repair for you, its a common problem, shouldn't cost much, good luck , the Yeti

May 20, 2009 | Miele 20 in. KM405 Gas Cooktop

2 Answers

Viking professional 30 inch, sparking problem


If you have replaced the spark module with the new, blue PA020041 Tytronics 0+4 spark module, the physical positions of the leads that go to the burner igniters are reversed compared to the positions on the old, white module. Make sure that the switch wire for the burner and the position of the spark wire both go to the same burner! The positions are marked on the white label with green lettering.

Nov 25, 2008 | Viking 31 in. VGSU101 Gas Cooktop

2 Answers

Rv cooktop range 22 series


hi,

it sounds like the oven safety valve is bad, it will reach a point when the pilot will make enough energy to keep itself lit, but not enough to open the gas valve to light. it will need to be replaced. if you are handy you can do this, but make sure you shut off the gas to the range first. you should be able to find a replacement online, if not check with a local LP gas company that sells parts to the public.

Feb 25, 2008 | Cooktops

3 Answers

Burner ignites but doesn't stay lit


The Thermocoupler is faulty or has a bad connection - once the burner is lit, it heats the thermocoupler which then send a small signal to the valve to stay on - at that time you release the knob and the valve stays on ( supplies gas). If you give me a model number, i can get you a part number and price.

Jan 23, 2008 | Miele 23 in. KM360G Gas Cooktop

3 Answers

Baumatic B40 Gas Hob : Gas not staying on.


we have the same problem... try removing the knob, ours works fine without the knobs ????

Dec 19, 2007 | Baumatic 24 in. B40 Gas Cooktop

1 Answer

Burner will not stay lit


Presuming the flame is touching the thermocouple, try putting slightly more pressure on the knob and hold for a few seconds longer. If this doesn't work try going through the same process with the knob removed - if this works you need to put a small piece of packing in the shaft of the knob ( a small piece paper might do). If this fails you need a new thermocouple.

Nov 10, 2007 | Miele 20 in. KM405 Gas Cooktop

Not finding what you are looking for?
Bosch 30 in. NGP 732 / 736 Gas Cooktop Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Cooktops Experts

paulcarew

Level 3 Expert

2456 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Bosch Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...