Question about Yamaha Basic 8-Student LC3 Music Lab Complete

Open Question

LC3 yamaha music lab

All the lights are on the controller and will not turn off. I can no longer control the system. How to fix?

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: Volume control on unit

Kent, Unfortunately, it sounds as if the encoder is broken. The encoder is a digital input which takes the place of a traditional volume control, and is what holds the volume knob in place and spins. Since it works fine with the remote, that means everything else is ok, but you will have to replace, or have a tech replace, the encoder itself.

Posted on Sep 16, 2008

  • 2 Answers

SOURCE: Yamaha acoustic-electric apx-6c. Controller


I found the problem--a broken wire on the guitar jack. Strange, but because of that, the indicator on the controller wouldn't come on. Really a simple solder fix, and everything works fine! Thanks corpmica and fredy2 for your replies!

Posted on May 25, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to troubleshoot remote controll

Most Yamaha receivers have a remote ID so if you have more than one Yamaha you can control one without bothering the other, do you still have your owners manual? If not have you tried the people at Yamaha they are very helpful with a problem like this but for an example I have my Remote ID set at ID1 because I do have 2 Yamaha receivers the RX-V1300 and the RX-A3020, see if you can find the section in your manual that talks about remote IDs and let me know if that fixes the problem and you can always goto but that is the site for the United States they do have sites for many countries at

Apr 26, 2014 | Yamaha RX-V659 Receiver

1 Answer

Lscreen problem

Look at the back of the keyboard,there is a small knob that controls the screen clarity,turn this to fix it,if that don't work,you need to get the screen replaced.

Feb 03, 2013 | Yamaha PSR-S500 Digital Keyboard

1 Answer

How do i connect lights to a yamaha emx 512

There is no way to hook up any form of lights to the Yamaha EMX512S. If you want to use DMX lights, you would need to buy a DMX controller. There are both analog and software controllers. Controller prices can range from $50 to over $500.

Aug 24, 2011 | Yamaha Emx88s Powered PA Mixer System

1 Answer

How do i get the security system out of valet mode?

From remote: press F twice on the remote then unlock. (F, F, Unlock) From car: have door open, turn key to ignition position (ON), then OFF, then press and release the button on the control center (antenna on the windshield).
hope this helps.

Mar 03, 2011 | 991 Responder LC3 SST Security/Remote...

2 Answers

Battery on Python 951 control is dead. Didn't come with a recharge cable - what should I use or what can I do to recharge the battery?

The plug of the remote is similiar to many cell phone chargers. They can also be charged with a USB cable connected to a computer.

Jan 20, 2011 | 991 Responder LC3 SST Security/Remote...

1 Answer

I HAVE A Yamaha PSR 260. About 8 years old. Recently it became defective.: Only the display lights up . No sound. No response to any button. When volume control is turned, I can hear the faint rustle on...

This MAY be due to a key contact or button that is STUCK "on".

Often this will freeze the controller.

Make sure power adapter is the correct one... underpowered or incorrect ones cause trouble.

Mar 20, 2010 | Yamaha Music

1 Answer

Have a yamaha 166cxmixer into roland 1608 snake with controller there is a switcher between them and I'm getting no signal the reac light is flashing and I can't get the controller to work

You are mixing apples and oranges. The Roland uses a digital pseudo Ethernet signal and the Yamaha is analog. They are incompatible.

Jan 27, 2010 | Music

1 Answer

Yamaha clavinova clp 200 - ear phone jack slid

The control panel hinges upwards and you have to move the keybed back a bit to get at the jack. All the screws on the bottom for the keybed. I'm not sure where the ones for the control panel are.

Oct 12, 2009 | Yamaha Music

2 Answers

Lose of external speakers volume and balance controls

Hi Lescot, Did you re-installed it with XP deafult driver? if so, this is it! uninstall the driver, and reinstall the original manufacutre driver: [url=]click here[/url] good luck

Nov 19, 2005 | Creative Labs SoundBlaster Live! Sound...

Not finding what you are looking for?
Yamaha Basic 8-Student LC3 Music Lab Complete Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Computers & Internet Experts


Level 3 Expert

2600 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Yamaha Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides