Question about Hitachi Heating & Cooling

1 Answer

Nsp05l6 power of after 3 minutes

Posted by on

  • 3 more comments 
  • Rajkumar
    Rajkumar May 09, 2014

    some dayes before the tp of pcb has burnt after replace the component "tp247"

  • Rajkumar
    Rajkumar May 09, 2014

    ac working fine but after inserting the pcb in the box where it should be the ac all power goes no light no led no operation but after 5 to ten minutes automatically power up and start for 3 minutes and then again power off .........

  • Rajkumar
    Rajkumar May 09, 2014

    ac working fine but after inserting the pcb in the box where it should be the ac all power goes no light no led no operation but after 5 to ten minutes automatically power up and start for 3 minutes and then again power off .........

  • Rajkumar
    Rajkumar May 09, 2014

    but when we pull back card from its box ac working fine.

  • Rajkumar
    Rajkumar May 09, 2014

    but when we pull back card from its box ac working fine.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

May be the capacitor or too low on freon or maybe it is just too humid and ice is forming on the evaporator coils.
JOAT

Posted on May 09, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pro form 630ds just powers off


Check the walking belt, maybe it is creating much friction and you need a new belt. You can buy one on WalkingBelts.com

Dec 22, 2013 | Exercise & Fitness

1 Answer

Pcb nsp05l6


my power board str burning pleasesendstrnumber

May 01, 2013 | Hitachi Heating & Cooling

1 Answer

Color separation ~ Insignia 32" NS-LCD32


1. Unplug unit from wall for 3 minutes;
2. Press & hold Power button for 1 minute;
3. Plug in unit.
OR:
1. Unplug for 3 minutes.
2. Plug in unit.
3. HOLD Power Button as unit starts ... hold until the unit flickers on then off twice.


This effectively returns the components to factory specs, much like resetting a computer. It offers a *temporary* fix, lasting 45 minutes to hours. All depends on the unit.

Mom has an Insignia 32" with the same color separation problem, which worsens as the day progresses. Best results achieved while television is cold.

Dust in the unit could contribute to the problem ... try to keep the unit dust free as possible.

Sep 16, 2012 | Insignia NS-LCD32 LCD TV

1 Answer

Sony KDF-55E2000 power led blinks red 3 times....


Are you using an extension cable? If you are, try plugging it directly into the wall.

Alternatively, call up the helpline and they may be able to provide more insight into your specific problem.

Jul 20, 2017 | Sony Grand WEGA KDF55E2000 55" Projection...

1 Answer

My DTC 6200 converter/decoder was working fine. A few weeks ago I have disconnected it, pull the power cord out of the AC outlet, put the decoder in a safe place. Then when I finish painting, I hook...


Hello
Check out these with your Motorola converter

[1] Verify that the AC power cord is connected to the DCT*
and an AC outlet.

[2] If the DCT* is connected to a switched outlet on another
unit, verify that that unit is powered on.

[3] Press the POWER button on the DCT* front panel instead

of the remote control. The batteries in the remote control
may be depleted

[4] The DCT* may have received a software update and

may not power on while the new software is being
installed. Try again in a few minutes.
OK.

Oct 21, 2011 | Arris DCT6200 DTV Receiver

1 Answer

I recharge my palm zire z22 but it dont turn off, I tried to reset but after do it. return on.


1. Go to Home Screen. 2. Select Prefs. 3. Select Power. 4. Select Auto -off after 30 seconds(1 minutes, 2 minutes or 3 minutes, whatever you want)
Hopefully this answers your question.
or there is a Power button on left side of device. Make sure the device is unlocked and press Power button.

Mar 02, 2011 | Palm Z22 Handheld

1 Answer

Im conected to router, bud i can't get to internet...


Hi,
try to do a POWER CYCLE. This helps a lot of times.
Steps to do a Power Cycle:-
1. Turn Off all the devices (Computer, Modem Router)
2. After about 5 - 10 minutes, Turn on the Modem First & wait for about 3 minutes.
3. Nextly turn on the Router & then again, wait for about 3 minutes.
4. Now, turn on the computer & Check.

Hope this helps.
Cheers!!! Have a nice day!!!

Sep 14, 2010 | Zyxel NBG-417N Wireless Router

1 Answer

Oven shows F2 fault several times a week. The oven is less than a year old and we keep it very clean.


F2 EO Shorted keypad/
key stuck
1. Disconnect power from oven for longer than 30 seconds.
2. Reapply power and observe for longer than 1 minute.
3. If failure remains, disconnect power, replace control, then go back to step 2.
F2 E1 Keytail unplugged 1. Verify that keypad is plugged into the connector on back of control.
2. Disconnect power from oven for longer than 30 seconds.
2. Reapply power and observe for longer than 1 minute.
3. If failure remains, disconnect power, replace control, then go back to step 3.

Nov 19, 2009 | Whirlpool Ovens

1 Answer

Computer stopped receiving wireless router signal


In this order: 1) Turn off all PCs and printers connected to the router. 2) Unplug your router's power cord. 3) Unplug your modem's power cord. 4) Wait for at least 2-3 minutes. 5) Connect the modem's power cord and wait for at least 2-3 minutes. 6) Connect the router's power cord wait for at least 2-3 minutes. 7) Turn on each PC separately and wait until it is completely finished booting before turning on the next PC.

If you still do not have connectivity, read the manual and change the channel of the modem. YOu may be experiencing some RF interference, ie microwave, wireless phone system etc...

Oct 29, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Power Brightness dims after using Kinoma Player


Ok i think i can help,

Step 1: Go to preferences
Step 2: Go to power
Step 3: Change the Auto-off after: feature and increase it to 3 minutes, the maximum.

I know this will only help it a lil from the 1 minute you had before, but if you pres the volume button or something within the 3 minutes it will restart the 3 minutes.

Masalama
Sheeraz Khan

Jan 02, 2008 | Palm Treo 755p Smartphone

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Heating & Cooling Experts

D. E. Hev

Level 3 Expert

1167 Answers

rugby prop

Level 3 Expert

548 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Hitachi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...