Question about Sony 42 inch KLV-42EX410 Multi System LED TV
Hey here is the problem my sony bravia KLV42EX410/32EX310/22EX310 Is 3 times on or off automaticaly what can do please help if any body have solution please reply me on email@example.com
Posted on Nov 11, 2015
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
Posted on May 09, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the Standby light is blinking at the front panel of the TV, it seems that there is an internal malfunction occurred in the TV.
I will forward a link to a page where you can get more information and troubleshooting steps for this issue.
Please perform the steps provided on the page. If the issue still persists then service of the TV is required.
Posted on Jun 19, 2009
SOURCE: Hi i have a problem
Although I'm not familiar with that particular TV, it's sounds like it could be a problem with the power supply board, which is a common problem with many HDTV's. Specifically, look for faulty electrolytic capacitors on the power supply board. Faulty as in: discolored label from heat, bulging, exploded, or all of the above.
Hope this helps!
Posted on Feb 13, 2011
SOURCE: I have sony Bravia KLV
AKB circuit (automatic kine bias), the timer/standby indicator blinks
for about 30 seconds then goes to the self-diagnosis function.
Something is wrong with the video. Check video out, Q705, 732, 761
and other components on the C board, also check Q218, 219, 220 on the
A board. In addition, unit could be in IK blanking, try turning up
AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.
Posted on Mar 09, 2011
SOURCE: KLV S26A10 sony tv power
There's a good chance you have failing electrolytic capacitors either in the power section or the inverter section or both.
Any caps in these sections that look bulged at the top, or bulged/leaking at the bottom need to be replaced.
If you repeatedly turn it off and on, eventually it'll probably stay on, but every time you turn it off, the TV will get harder and harder to start up until one day it just won't.
Sometimes you have to do the opposite to start it up and unplug it for some time and then try again.
If you aren't tech savvy, don't worry, read the rest of this solution and watch the videos.
If you are handy with a soldering iron and can identify the power supply and inverter / FM section for the backlights, an inexpensive handful of capacitors will likely fix you right up.
Match the capacitance on the capacitors. Go over voltage if you can, and still have them fit.
IE - it's not a bad idea to replace a 10V cap with a 16V or 25V or even a 50V, but don't replace a 680uF cap with a 500uF or a 1000uF (unless you are positive it's only doing ripple filtering, and even then, you should go OVER, not under the uF rating).
Most of the caps that go are 10V 1000uF or 3300uF.
I found some great videos of the procedure (for many Samsungs with the same issue) on youtube.
As you can see, this issue spans plasma TVs, as well as large and small LCD TVs and monitors.
The parts are cheap, and skill required is minimal.
You can order the capacitors online from places like www.digikey.com and they are usually less than a dollar each. They have a flat shipping rate (here it's $8) and the parts arrive next business day.
Posted on Jul 11, 2011
Tips for a great answer:
Aug 13, 2017 | Sony Televison & Video
Aug 03, 2016 | Sony Televison & Video
Feb 20, 2015 | Sony KLV-40V300A Multi-System BRAVIA LCD...
Dec 30, 2013 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV
Apr 08, 2013 | Sony KLV-26S550A 26 inch Multi-System HDTV...
Feb 03, 2013 | Televison & Video
Jan 09, 2013 | Sony 42 inch KLV-42EX410 Multi System LED...
Jun 02, 2012 | Sony BRAVIA KDL-40S2010 40 in. LCD...
Jun 09, 2009 | Sony KLV-S32A10 32 in. HD-Ready LCD...
Mar 18, 2014 | Sony 42 inch KLV-42EX410 Multi System LED...
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: