Question about Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the machine does not start.
Make sure the circuit breakers or fuses are functional in the main electrical panel.
Try to turn them OFF and ON again.
You might need to check the thermal or non thermal fuses inside your washer.
If all appears in working order, you might have a burnt motor if no noise comes from it when you pull out the knob.
Posted on Apr 09, 2008
Take off your hoses and check filters for sediment build up. If this is ok, you may need to replace the water inlet valve.
Posted on Feb 04, 2009
SOURCE: will not spin
If the motor is not running, it could be a faulty timer. If the motor runs, it could be the transmission. Check to make sure the pump belt is ok and the pump pulley is not seized by tilting the machine back and checking.
Posted on Feb 26, 2009
The belt turn the pulley, but the height of the pulley is worn out so it didn't push up a mechanism to release the brake and to engage with the clutch to make the spin.
You have to takethe shaft out to study how it works then it makes sense on what I 'm talking.
The pulley cost only $11 but it is a major laboring exercise. It is a good learning to have hands on to this problem. Good luck on replacing the pulley.
Posted on Aug 09, 2009
Tips for a great answer:
Sep 06, 2014 | Washing Machines
Dec 03, 2012 | Maytag Washing Machines
Nov 22, 2012 | Maytag Washing Machines
Aug 08, 2009 | Maytag Dependable Care LAT9706
Feb 04, 2009 | Maytag Atlantis MAV6451 Top Load Washer
35 people viewed this question
Usually answered in minutes!