Question about Epson 1925W Projector
What is most common repair to fix this isue?
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Purchased our76C in Jan, 2007. It is our second unit now that has had the same symptoms. When the unit starts up, the Power light is steady green as normal for a few minutes, but no image is projected. After a few minutes the lights do as you described. Both times Epson support authorized a new unit to be shipped out immediately. They said they had no known issues about it and didn't indicate what was causing the problem. Apparently it is not just the lamp wither. Also, the lamps both had under 20 hours on them.
Posted on Sep 24, 2007
I assume this is an LCD. I don't remember the s4 being a DLP projector.
This sounds like the LCD panel used for the red color has gone out. The image is made up of red, green and blue images layered upon the screen. If the red panel has gone out then there is nothing filtering out the red light in the image. This causes a nice red hue to the whole screen.
It could be a simple open and reconnect fix. I personally have never opened a projector, so I'm not going to walk you through it as I do not know how hard it would be to tinker with. It should eb a cheap fix for a true repair man though.
Posted on Apr 01, 2009
Go to http://files.support.epson.com/pdf/pl83pl/pl83pl00ug.pdf#page=80&view=FitV&pagemode=none page 80, "What to do when the lights flash" . If that doesn't do it or it's not clear, please get back to me.
Posted on Jun 26, 2009
EPSON PowerLite 7250 Reset
the lamp counter hours in 3 steps 1. Make sure, your projector is ON 2. Hold down the Help and Menu buttons
for 5 seconds. 3. Hold down the Tracking and Tracking -
buttons for 5 seconds.
The "A.S." screen will appear.
EPSON PowerLite 7250
the lamp counter hours in 3 steps
1. Make sure, your projector is ON
2. Hold down the Help and Menu buttons
for 5 seconds.
3. Hold down the Tracking and Tracking -
buttons for 5 seconds.
Posted on Sep 20, 2010
Tips for a great answer:
Nov 08, 2016 | Epson 1925W Projector
Dec 14, 2015 | Office Equipment & Supplies
Jul 10, 2014 | Epson (V13H010L34) Projector Lamp for...
Jan 27, 2018 | Epson PowerLite 830p Multimedia Projector
Mar 17, 2011 | Epson PowerLite® 83c LCD Projector
Jan 11, 2009 | Televison & Video
Jun 17, 2007 | Epson PowerLite 7500 Multimedia Projector
161 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: