Question about HP Hewlett-Packard - LaserJet Pro M1217nfw MFP

1 Answer

What should i do to Stop initialization error

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,509 Answers

Check the paper paths are clear and reseat the toner cartridge. I assume this is not the result of a firmware update?
Try a reset, I found instructions for a hardware reset on another forum:
1. Power down
2. Press <right> and <cancel> buttons together
3. Power up during pressing these Buttons
this should clear the error, if the problem is due to a firmware update here's a link to an hp forum
M1212nf fails to initialize after firmware update HP Support Forum...

Posted on May 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba E studio 182 power initialization problem


On startup, if the machine shows a wrench-icon, press down "8" and "clear/stop" key simultaneously to show the exact error-codes. A list of detailed error-codes can be found here: http://officeimagingsystems.com/id175.html

Jun 27, 2014 | Toshiba E-Studio 182 Copy Machine

2 Answers

I have canon pixma 310 its say chech ink u163 what thats mean


Good Day Sandip920!

Error U163 means, the printer detected that your black ink cartridge has been refilled with new ink.
It is very easy to clear this error and keep your printer printing.

How?
1. Turn on your printer.
2. When error U163 appears, press and hold the STOP/RESET buton on the printer. Hold it down until the printer self restart and initialize.
3. if after U163 is cleared off and appear another error, U162, press and hold again the STOP/RESET button and wait till printer self restart and initialize again.

Hope this helps!

Don't forget to rate my answer.
Thanks for asking Fixya.

Sep 16, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Error 71 / It is not working.


This error indicates that there is a scanner motor error. Try and remove the error by following these steps: Press MENU *,2,8,6,4. The machine beeps for approximately 1 second and will display "MAINTENANCE" on the screen, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the keys. Now you are inside the simulation, Press 01 to reset the error status. After that press 99 to exit the simulation.

- Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine exit from the maintenance mode, restoring it to the standby state.
- Pressing the Stop button after entering only one digit restores the machine to the initial stage of the maintenance mode.

If the error comes back call Brother support, here are the contact details:

7777 North Brother Blvd.
Bartlett, Tennessee 38133

Phone: 1-877-BROTHER (877-276-8437)
901-379-1215 (fax)

Nov 22, 2010 | Brother DCP 1400 All-In-One Laser Printer

1 Answer

Machine error 71


This error indicates that there is a scanner motor error. Try and remove the error by following these steps: Press MENU *,2,8,6,4. The machine beeps for approximately 1 second and will display "MAINTENANCE" on the screen, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the keys. Now you are inside the simulation, Press 01 to reset the error status. After that press 99 to exit the simulation.

- Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine exit from the maintenance mode, restoring it to the standby state.
- Pressing the Stop button after entering only one digit restores the machine to the initial stage of the maintenance mode.

If the error comes back call Brother support, here are the contact details:

7777 North Brother Blvd.
Bartlett, Tennessee 38133

Phone: 1-877-BROTHER (877-276-8437)
901-379-1215 (fax)

Monday-Friday, 9:00am to 8:00pm Eastern Time

Nov 15, 2010 | Brother IntelliFAX 4100 Laser Fax

1 Answer

What does the code c-620 mean on a cs 1505


This is a fuser related error. Either the thermostat or thermister is faulty. The error can be rest by pressing and holding down stop, start, left exposure or light. Release the keys and press stop. The display will show U000. Press 163, press Start twice. the machine will initialize.

Nov 09, 2010 | Copystar CS-1505 Copier

1 Answer

Error 71


This error means that there is a scanner motor error. Try and remove the error by following these steps: Press MENU *,2,8,6,4. The machine beeps for approximately 1 second and will display "MAINTENANCE" on the screen, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the keys. Now you are inside the simulation, Press 01 to reset the error status. After that press 99 to exit the simulation.

- Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine exit from the maintenance mode, restoring it to the standby state.
- Pressing the Stop button after entering only one digit restores the machine to the initial stage of the maintenance mode.

If the error comes back call Brother support, here are the contact details:

7777 North Brother Blvd.
Bartlett, Tennessee 38133

Phone: 1-877-BROTHER (877-276-8437)
901-379-1215 (fax)

Monday-Friday, 9:00am to 8:00pm Eastern Time

Sep 15, 2010 | Brother MFC 8500 All-In-One Laser Printer

1 Answer

Error code 501 solution


To clear error 5100 clean the surface of the copper contact of the ink cartridges with a moistened cloth and let it air dry. Fix the cartridges to the holder and return properly the cover of the printer.

These 2 reset procedures will help you clear the errors displaying in the control panel of the printer and let you print again.

To clear U053, U051 and U052
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

To clear error U162 or U163
1. Turn off your printer an turn it on again
2. After the printer initialize try to copy or print. The error will appear.
3. When the error is displayed on the display panel of the printer, Press and Hold the STOP/RESET button and wait until it self restart.
4. Release the STOP/RESET button the the printer is restarting.
5. Wait for a few seconds and the pending print jobs will commence.




Aug 10, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Machine error 71


This error means that there is a scanner motor error. Try and remove the error by following these steps: Press MENU *,2,8,6,4. The machine beeps for approximately 1 second and will display "MAINTENANCE" on the screen, indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from the keys. Now you are inside the simulation, Press 01 to reset the error status. After that press 99 to exit the simulation.

- Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine exit from the maintenance mode, restoring it to the standby state.
- Pressing the Stop button after entering only one digit restores the machine to the initial stage of the maintenance mode.

If the error comes back call Brother support, here are the contact details:

7777 North Brother Blvd.
Bartlett, Tennessee 38133

Phone: 1-877-BROTHER (877-276-8437)
901-379-1215 (fax)

Monday-Friday, 9:00am to 8:00pm Eastern Time

Oct 27, 2009 | Brother MFC-8840D All-In-One Laser Printer

2 Answers

Error 116-365 on dc 3535


That is a hard drive error.
There is a job stuck on it.
Hold 4 + stop + powersave as you turn on the machine.
That will cause the Hard drive to initialize and should clear the job.
I have seen that caused by someone doing an internet print job.
You may want to unplug the printer cable and see if an incoming job is corrupting the network. I have even seen networks be hacked and the machines affected.
If that doesn't reset it. Check the connections to the hard drive.
When you do the hard drive initialization. Hold the 4 , the stop, and power save as you power it on , hold the buttons until you see the progress bar appears on the screen, then release the keys.

Jul 06, 2009 | Xerox DocuColor 3535 Copier

1 Answer

"Broken Registration"


U need to press "STOP" to return to idle state.
If this Error Message is repeatedly displayed, machine programming
has become corrupted.The machine must be re-initialized.

Pressing *13 and ON the machine, it will re-initialized the fax.

Jan 03, 2009 | Toshiba e-Studio DP170F Plain Paper Laser...

Not finding what you are looking for?
HP Hewlett-Packard - LaserJet Pro M1217nfw MFP Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...