Question about Computers & Internet

1 Answer

When pluged to power,the stanby mode is on but the screen doesn't not display

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Check out the cables if they are properly connected, particularly the VGA-- the cable that connects the monitor to the computer. Try removing and reconnecting it, just be careful. There are pins that might be bent.

If this doesn't work, you may have a defective video card or memory, or both. The basic thing you can do is remove the video card (if you have any), or the memory. Then clean the gold contacts with rubber eraser and install it back.

Removing video card: http://bit.ly/1fRiBJu
Removing memory: http://bit.ly/1s5svYr

If this doesn't work call a computer technician.

Posted on May 08, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix 1508 panel lock on


1) turn off the main power button (not the big LED stanby button)
2) press and hold "input mode" and "speakers" button simultaneously
3) press and hold the main power button for seconds, until display flashes.
4) release all those buttons. The AVR is already reset to factory mode.

Jun 27, 2014 | Denon Audio Players & Recorders

1 Answer

Marantz NR1403 standby mode only


Connect all speakers . Does it start?
If not , you have at least one audio output amplifier failure.
Seek out a Marantz dealer to help you get a tech

Jan 31, 2014 | Marantz NR1403 Slim-Line Dolby TrueHD AV...

1 Answer

I have a toshiba 46h84 it plays the audio but doesn't display any video.


Bad cable box. Try unpluging box and pluging back in.

Feb 11, 2013 | Televison & Video

1 Answer

Le37r88bd


if goes to stand by mode after turn on which mean either the power supply board doesn't have correct out put voltage or an error was detected that is why the main board goes to safety mode. so you will need first to locate the power supply board look for any bulging capacitor or burnt parts here.

Sep 16, 2012 | Televison & Video

1 Answer

Tv is in stanby mode. when i turn on power it seems like it wants to start but nothing comes up on screen. stanby light is blinking


The problem is in the main board of the tv, it is either a power supply issue or a high voltage problem. In order to isolate you will need a tv tech to check the set out and cost involved.

Jan 07, 2011 | Sony FD Trinitron WEGA KV-34HS510 34" TV

1 Answer

Front panel is locked and don't know how to unlock it.


1) turn off the main power button (not the big LED stanby button)
2) press and hold "input mode" and "speakers" button simultaneously
3) press and hold the main power button for seconds, until display flashes.
4) release all those buttons. The AVR is already reset to factory mode.

Nov 03, 2010 | Denon AVR-1508 Receiver

1 Answer

Tv is automatically switching to stanby mode after a few seconds


Hello,

Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Hope this helpout......

Aug 03, 2010 | Sharp LC32D44EBK 32 in. LCD TV

1 Answer

Monitor switches on then goes into stanby


No input from Video card, try to connect second video cards head to your monitor.

Apr 19, 2010 | Dell E173FP 17" LCD Monitor

1 Answer

How do you disable the stanby timer by power


U can't stanby mode indecation power is there,for ready to go to power when power go to high voltage.

Oct 06, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Can't turn on from Stanby mode


I would assume the power board has a problem. A tech could possibly repair it without replacing the whole board.

Nov 13, 2008 | Pioneer PDP-5070HD 50 in. Plasma...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...