I was trying to hook up another remote and I got it to work but then the other remote went dead. So I hooked up that one and it worked but the other turned off. I tried to hook it up and they both went dead. I tried hooking just one up and it didn't turn on. Theirs no cracks, I never dropped it. I tried the power button on the wii remote but they still dont work any help?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try manually disarming the system when you hook up the battery cable. After you hook up the cable ( the siren will be going), turn ignition on, press and release valet switch one time. The siren will stop and you will be able to start the vehicle. Test the remote. If the remote is not working, and the battery is good, try reprogramming the remote. Turn ignition on, press and release valet switch one time. Press and HOLD valet switch, press lock button on remote. You will hear a confirmation chirp when the remote is programmed. Turn ignition off. Test system.
You must first sync the remote and consul.To do this you take off the back of the remote then hit the red button.Their is a red button on the consul that you need to push at the same time then push the a button on the remote.If you are trying to hook up the old style Nintendo controller then you plug the controller in to the end of the wii remoute the same way you hook up the nunchuk.