Question about Office Equipment & Supplies

Open Question

Hp printer deskjet f2840

My power cord was damaged. How to get new one?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fwadley
  • 482 Answers

SOURCE: need new driver for hp deskjet 1120c printer

http://www.nodevice.com/driver/DeskJet_1120C/get29442.html

Posted on Dec 19, 2007

Ad
leroyal
  • 2120 Answers

SOURCE: HP Psc 1410v All-in-One Printer Power cord And adapter

Check www.hp.com partsurfer or eBay

Posted on Jan 09, 2009

tommya300
  • 724 Answers

SOURCE: HP Deskjet 9800 will not power up.

Is there power coming out from the supply end
Is is a DC or and AC output supply?
If is it an AC output supply tyhebm in the back of the HP had an AC to DC converted that is realy a diode bridge and should contain a fuse in the circuit somewhere on that board

Posted on Jul 27, 2009

  • 8404 Answers

SOURCE: how to hookup a hp deskjet 2480 printer

Lets think about this for a second:

How do you install the software (drivers, actually) when you dont have the CD?

You go to the manufacturers website and download them to your computer. Make sure you get the driver for the OPERATING SYSTEM you are using on your computer.

How do you connect a printer without a USB cord?

Is your printer 'wireless' or 'bluetooth'? If no, and there is no special HP cord and no parallel port, you cannot connect it. If it requires a wire, it REQUIRES a wire.

Ok, maybe you don't have one - most printers do not come with an appropriate cable. In this case, get one. They are available where ever computer supplies are sold. You ask for a USB Printer Cable. Staples, Office Max, Office Depot, Best Buy, Radio Shack, other Big Box store, Joe Blow's computer repair shop. Don't have any such in your area, look at the advertisers here at FixYa.com. You could always go back to the place you bought your printer and get one from them.

The 64 $ question is this: Is your new printer compatable with the Operating System on your computer? ... and how do you know this? Search "microsoft compatability list for (insert the name of your OS)". If your printer is listed by make and model for your OS, that means MS is supporting the printer. If it is NOT listed, MS is NOT supporting the printer, in which case you must go to www.dell.com/support or www.hp.com/support to look for a driver for your OS (NOT for your computer model, necessarily). If one is listed, you should get it. If none is listed, Dell will not support this printer when used by your OS. In this case, you are probably at the end of the road, though there is occasionally a driver available for some printers from third party developers.

Your computer tells you there is no Internet Explorer. Did you use the Windows Search function to look for this program? Start - Search - enter 'Internet Explorer'. When you find it, click on it and see what happens. There is a very good possibility that your short cut is no good. If that is the case, (you will know if the program shows up and runs) create a new shortcut. If it is not there, hopefully your computer is on a network and you can download the program from a variety of sources directly to the computer with no IE. If IE runs but tells you it is off line, click TOOLS, OPTIONS, unclick "work offline". Then try again.

There is no recognition of the USB cord but it is there. You see it, obviously, but the computer cant see it. Guess what, doesn't make any difference if you see it. Replace the cord. FYI, there is USB 1, USB 2 and USB 3 is waiting to be introduced. Which one do you have? Which one does your printer require?

I trust you will find these responses will address your issues and solve your trouble. If you need more assistance, please post a comment to this quesiton.

Thank you for your interest in FixYa.com

Posted on Jan 15, 2010

  • 225 Answers

SOURCE: I was given an HP deskjet 5550 printer w/o the

Open the printer cover and check if the cartridges are in the middle position already or they start moving towards middle position. If they are already there, the door switch is malfunctioning. Very often the door can not actuate the switch. Try to press the switch with thin object and see if cartridges will go to their home position. If they not, then some of cartridges is not recognized by the printer. Look for drawings inside the printer door. The carriage has arrow that points to a drawing, representing the faulty cartridge. Reseat the fautly cartridge and firmly close the door. Otherwise replace the cartridge with a new one.

Posted on Aug 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp laserjet 1020 meltdown


Hi,

Try this out:

Some printers require time to turn on. These printers may or may not give feedback in the form of blinking light(s). Wait up to a minute for the power light to come on before proceeding with the steps below. Instructions If the printer uses a power adapter (module), follow the instructions below. If the printer uses only a power cord, see the section below entitled “ If the printer uses only a power cord .” If the printer uses a power module Follow the steps below to ensure power is properly supplied to the printer:
  1. Check the power module part number against the part number listed in the User’s Guide to ensure the proper power adapter is being used.
  2. Disconnect the power cord or adapter from the wall outlet.
  3. Disconnect the printer data cable from the printer.
  4. Disconnect the power cord from the printer, wait thirty seconds, then reconnect the power cord to the printer.
  5. Disconnect the power cord from the power module and reconnect the power cord to the power module. This may not be necessary if the power module has a permanently attached power cord.
  6. Reconnect the power cord directly into a working wall outlet. If the power cord was plugged into a surge protector or power strip, plug the power cord directly into a wall outlet instead. NOTE: "The HP Photosmart 8100, 8400, and HP Deskjet 6000 series printer power cords feature a green LED built into the power plug. If the LED is not glowing, the power module may have failed. Proceed to step 7 below.
  7. If the printer still will not turn on or the power LED built into the power cord is not glowing, plug the printer into a wall outlet in another room. If the printer or power LED turns on when connected to an electrical outlet in another room, there is a problem with the power in the original room.
  8. If there is still no power to the printer, then the power module, cord, or printer may be defective. Try the power module/cord on another HP Deskjet or Photosmart printer, of the same model if possible, to see if the power module is functioning. If the power LED is still not glowing, the power module may be defective. Replace the power module and cord.
  9. If the power module/cord works on the other printer, then this printer is defective. Service your printer.
  10. If you cannot determine whether the problem is the printer or the power module/cord, or if another printer is not available to test with, replace the power module/cord first. If this does not resolve the issue, service your printer.
If the printer uses only power cord Follow the steps below to ensure power is properly supplied to the printer:
  1. Check the power module part number against the part number listed in the User’s Guide to ensure the proper power adapter is being used.
  2. Disconnect the power cord from the wall outlet.
  3. Disconnect the printer data cable from the printer.
  4. Disconnect the power cord from the printer, wait thirty seconds, then reconnect the power cord to the printer.
  5. Reconnect the power cord directly into a working wall outlet. If the power cord was plugged into a surge protector or power strip, plug the power cord directly into a wall outlet instead.
  6. If the printer still will not turn on, plug the printer into a wall outlet in another room. If the printer turn on when connected to an electrical outlet in another room, there is a problem with the power in the original room.
  7. If there is still no power to the printer, then the power cord or printer may be defective. Try the power cord on another HP Deskjet or Photosmart printer to see if the power cord is functioning.
  8. If the power cord does not work on the other printer, it is defective. Replace the power cord.
  9. If the power cord works on the other printer, then this printer is defective. Service your printer.
  10. If another printer is not available to test with, carefully inspect the power cord for damage.
  11. Inspect the power cord for visible damage. If the power cord is damaged, replace the power cord first. If this does not resolve the issue, or if the power cord looks fine, then service your printer.

Goodluck,
Dont forget to rate me as fixya..

Jan 30, 2008 | HP LaserJet 1020 Printer

1 Answer

HP PRINTER ALL IN ONE F4185


Hi,

What is wrong with your power cord ? are you looking for a replacement chord ?

I am not sure but it may cost you atleast $30 to buy a new cord. I would recommend you to go for new printer in same price instead of cord.

Regards,
Sean

Feb 15, 2013 | HP Deskjet F4180 All-in-One Multifunction...

1 Answer

Red light is flashing


If you are experiencing bugs, glitches or other issues with your Deskjet F335, reset the printer.

  1. Press the "On" button to turn off the printer.

  2. Unplug the power cord from the back of the device.

  3. Plug the power cord back into the printer.

  4. Press the "On" button to turn the printer back on.



Read more: How to Reset the HP Deskjet F335 ' eHow.com http://www.ehow.com/how_6827213_reset-hp-deskjet-f335.html#ixzz15sv8ybgl

Nov 21, 2010 | HP Deskjet F335 All-In-One InkJet Printer

1 Answer

Missing power cord for hp f380 all-in-one printer


You should get a power cord for your printer to work,

A power cord for your deskjet printer can be bought at any computer accessory store close to you

Oct 03, 2010 | HP DeskJet F380 All-In-One Printer

1 Answer

HP DeskJet 930c InkJet. Simply will not turn on, yes the cord is in and yes the power is turned on and I have pushed the "ON" button. The printer did take a heavy knock, but there is no visible physical...


probably it has a bad contact on the power line ....it is either a cable loose or jut the supply is damaged... if you thing you manage ..just open it and take a look ...my guess is that if you change the power supply it will work ..

Mar 22, 2010 | HP DeskJet 930c InkJet Printer

1 Answer

Where to buy power cord for printer


I would not chance using the other cord. You may end up needing 2 power cords or another printer.

Doing some research, your printer should be a Deskjet 5550. VCVRA 0101 is a different designation not generally used to identify printers.

If this is indeed a Deskjet 5550, a new power cord can be purchased at online stores. (HP does not sell them.)

The part number you need (if in the US) is 0950-4081. An optional cord would be 0950-4082. Here is one such online store that has them:

http://store.l-f-l.com/cgi-bin/cp-app.cgi?pg=prod&ref=0950-4081

You can probably find others using google. Just do a search for HP 0950-4081.

Thanks for using Fixya.

(If not in the US, let me know. It would be a different power cord.)

Sep 18, 2009 | HP Office Equipment & Supplies

2 Answers

Lost my power cord for my printer ,where can i purchase a new one


Check at your local Wal-Mart, OfficeDepot, OfficeMax. If they sell the printer, they sell the A/C cord. Otherwise, www.sparepartswarehouse.com/HP,DeskJet-Other,Printer,Power-Cords.aspx
copy/paste that link into your browser window. They specialize in HP Power Cords, but running to one of the aforementioned stores in your neighborhood will be the quickest fix (and you'll save Shipping Charges, too).

Jul 18, 2009 | HP DeskJet F380 All-In-One Printer

1 Answer

Power cord is damaged and needs replaced


i am not in any way offiliated with the following website but it was the first one to come up in google

http://www.sparepartswarehouse.com/HP,Printer,Part,09572119.aspx

bearing in mind the part is quite cheap there must be lots of places you can obtain a spare/replacement power supply...and if they are sold seperately the clerk that gave you the advice about not being able to replace just the power cord must have been having a bad day/year/lifetime

Jan 07, 2009 | HP Deskjet F340 All-In-One Printer

1 Answer

Need Power Supply/Cord to HP 5440 Deskjet


Hi have you tried ebay ? search,--- low voltage power supplies, check out advertising at bottom of pages.

Oct 27, 2008 | HP Deskjet 5440 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...