Question about Sony SLV-660HF VHS VCR
After along tome sitting with a tape ion the machine I went topejct it and the tape was stuck
The generic error codes C32:xx indicate that a motor is not functioning. If you have not worked on these machines before, extreme caution is advised. These have extremely sensitive alignments that can easily be disturbed.
Please update this with your familiarity with these machines and I'll try to provide additional directions.
Posted on Feb 21, 2009
SOURCE: tape stuck in sony uvw-1800
02-874 error code signifies a defective takeup reel. The reel is not winding the tape in, so the deck won't go through the eject procedure. Check the connection to the takeup reel motor; if that's OK, the motor itself may be bad. Rarely, the takeup reel motor assembly will need to be replaced; usually it's a connection problem.
Posted on Jul 09, 2009
There schould be a release buuton on the rear of the machine. It's usually recessed and may be difficult to see. Press this with the yip if a ballpoint pen and extract the tape. If the tape is wrapped around the record/playback heads your only option is to remove the top cover and manually remove the tape. Sounds difficult but if you take your time it's not too bad a job.
Posted on Mar 08, 2010
Testimonial: "Thank you! - no button - took the top off. I depressed a lever next to the tape switched the VCR back on and pressed the eject button - it worked!"
Tips for a great answer:
Apr 28, 2015 | VCRs
May 11, 2014 | RCA VCRs
Mar 08, 2010 | Sony VCRs
Jul 05, 2009 | Sony HVR-1500 HDV VCR
Jul 02, 2009 | Sony UVW1800 VCR
Apr 19, 2008 | Philips VR620CAT VCR
Feb 29, 2008 | VCRs
Aug 28, 2006 | Philips VR630 VHS VCR
Aug 28, 2010 | Sony SLV-660HF VHS VCR
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: