Question about Juki MO-644D Mechanical Sewing Machine

Open Question

John deere 644 d have no brake after rebuilt transmission

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to set hook timing on my white model 644

Search the internet for:

"sewing machine timing"

there are multiple web sites and videos available.


Sep 16, 2016 | Sewing Machines

1 Answer

No knob on the bobin winder Husqvarna viking 6570

That is a problem with the high/low transmission. The screws that hold the winder post have slipped and the post pushed in to gearbox. The assembly needs to be taken out of the machine and rebuilt. A viking repair person who has been at it for a while might be able to repair this. You may need to look around as this is a repair that is not needed on machines made after the 70's and a lot of current repair people would not know how to do this.

Sep 12, 2013 | Husqvarna Viking 1

1 Answer

We're can I get a presser foot for a jaguar model 415 sewing machine

Keel's Kountry Kottage
4803 Edgewater Drive
Orlando, Fl 32804
M-F - 10-6
Sat - 10-2

Feb 20, 2013 | Sewing Machines

1 Answer

Need a part

Keel's Kountry Kottage
4803 Edgewater Drive
Orlando, Florida 32804

Monday - Friday 10-6
Saturday 10-2

Feb 20, 2013 | Euro-Pro 8260 Mechanical Sewing Machine

1 Answer

I have a John Deere L110 that won't start. Mowed grass then parked it and it wouldnt start. These are all of the things we have done: New spark plug, solinoid, all 3 safety switches, battery terminals...

problem could be: brake pedal is not depressed; PTO is engaged; battery terminals are corroded; battery not charged; blown fuse; or fusible link in starting circuit is blown.These are the Most Common Causes for your Problem. Recheck your voltage of the battery and then check it under a load....Take a Jumper Cable Set and Attach the Positive Lead to the Positive Post of the Battery. Take the Other End and FIRMLY Touch the Large Post of the Soleniod on the Starter Side. If the Starter Turns the Engine, then Check the Voltage from the Ignition Switch to the Soleniod. If the Voltage is Going From the Switch to the Soleniod When the Ignition Switch is in the Start Position, then Replace the Soleniod. If No Current from the Ignition Switch to the Small Post on the Soleniod, then The Ignition Switch is Bad ....Hope this helps

May 07, 2011 | Husqvarna Viking 1

1 Answer


This genset was made for John Deere. Take off the old hose.. walk into any busy automotive parts source and they will match yours up to a NEW hose. Hoses do not care about what brands they are installed on. I could refer you to a SDMO dealer to get the PN but... the part in hand routine at an automotive parts source should get your going again ASAP.

Thanks for choosing FixYa,

Apr 28, 2011 | Sewing Machines

1 Answer

Lower right thread (green) keeps coming out of its eye!

Dear Louise I had the same problem and it was suggested to me that I change the needles as one of them could be bent. I have done this and the problem is no more. Good luck sewhat

Apr 05, 2009 | Janome MyLock 644D

1 Answer

Machine just stops but power is on

that is the power board (in base plate) you need a rebuilt base plate. Unless you can rebuild the power board. You can buy a rebuilt board and send your in and receive a core credit. It still will probably run $200 to get one. It will also come with a 2 year warranty.

Mar 16, 2009 | PfaFF Tiptronic 2030

1 Answer

Electric Cord decided to part out my shark call me (john 9042623457) for price on all except computer (suspect bad) have all attach,pedal cord bobbins,etc.

Oct 29, 2008 | Euro-Pro 9120 Computerized Sewing Machine

Not finding what you are looking for?
Juki MO-644D Mechanical Sewing Machine Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Pete Alaniz

Level 1 Expert

13 Answers


Level 2 Expert

186 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides