Kymco seat removal??? - Health & Beauty

Check the ignition switch for continuity. When you switch off, there should be no continuity to the ignition.

TAKE SEAT OUT FIRST THEN JUST REMOVE FROM THERE AND COIL BACK IS A LIL BLACK BOX ON FRAME

oh my freaking god, no one is of help here.

fellow kymco owner here, id start off by looking for a locksmith to make up a key for you. they typically just break into the key lock, pull out the cylinder, and use the pins to aid in cutting a key. as soon as that is done, they will have a key done for you without destroying your locks. then as soon as your done, ask them to make 2 extra copies of your key and keep them spare somewhere. i keep one in my wallet, but the key head cut down smaller, and the other at home.

i hope this answers your question.

source: this has happened too many times...

A large screwdriver will break open the seat clamp.

There are three screws holding the seat down. One at the back which is easy to see the other two you need to remove each top side cover (left & right) to access the other two. More info here

Remove the seat. There should be a large plastic box with ( I think ) 6 screws in it to remove the air box cover. Go for it, then remove the filter. Your now exactly half way done.

get a manual for it and then you will be able to do any thing you have to do , when the time comes.

hi,

Remove the plastic panel on the left side of the bike just under the seat and you will see the battery. unscrew the metal bar that holds it in and simply slide the battery out.