Question about Stairmaster Stepmill 7000 Pt

1 Answer

Configuration required screen

Hello, My step is in miles and takes in miles? how do? abs Danilo PowerTech Fitness br.

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Stairmaster Master
  • 918 Answers

Display reads CONFIG RQRD or NTM CONFIG RQD on Stairmaster Equipment Probable Cause The message CONFIG RQRD or NTM CONFIG RQD appears when the console needs to be configured for the machine type it is installed. This message is common when the console has been replaced or if the settings have been changed. Message is commonly seen on various Stairmaster equipment such as bike models 3000CE, 3300CE, 3400CE, 3600RC, 3800RC and 3900RC; stepper models 4400PT, 4600PT, 4400CL, 4600CL and SC916; stepmill models 7000PT and SM916; elliptical model ClubStride 5100.
Corrective Action

  • Make sure the unit is in an "idle" state. "Idle" state means the console is not displaying an error or any message that requires data input. The display should basically be freshly powered up, scrolling the EKG or welcome message
  • Configure the console for the proper machine type by pressing Level UP, 80, ENTER
  • Using the Level UP or Level DOWN keys, scroll through to the proper machine type (Bike, Elliptical, Stairclimber or Stepmill)
  • Once the proper machine type is shown on the display select the machine type by pressing ENTER
  • This completes the steps necessary when your Stairmaster display reads CONFIG RQRD or NTM CONFIG RQD
Stairmaster Console Message CONFIG RQRD or NTM CONFIG RQD

Posted on Jul 22, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My fitbit has stopped working a couple of weeks ago. The face has pulled out of the band and there is a crack in the face. This is not a year old yet!

Hello, Shirley -

I hope you have kept the sales receipt for your Fitbit. It seems Fitbits have a 1 year warranty, but you may need proof of the date you purchased it if they cannot determine the date you activated your Fitbit.

Contact Fitbit Help directly and find out what can be done.

This is the link to the Fitbit Help page:
Choose Let's Talk.

Best wishes.

Feb 22, 2018 | Exercise & Fitness

1 Answer

Where in KZN can I buy a belt for a Trojan treadmill pulley Thanks

Hello, Hurriduth -

I am answering from the United States. I hope I am correct in thinking KZN stands for KwaZulu-Natal, in South Africa.

So far, I have only found information on treadmill repair business:

Best wishes.

Jan 10, 2018 | Exercise & Fitness

1 Answer

Isuzu 2.5 Extended cab D-Teq Wiring diagram for ABS ,As well as fitting location for ABS relay

welcome to a USA forum.
where are you, ?what country , not your address.
what car is this?, NONE STATED not fully.
what year car, none stated.
are you in Africa or Europe, well if yes we dont have your car here, nor books on it. zero.
sorry but cars are not the same all over the earth
nor are ABS,
nor at all years the same.
not by a wild shot.

my guess, is car is in AFRICA and is KB truck
you left off the KB word.... so..... its African
made in your GM/Isuzu plant there.

go to your dealer, Isuzu
buy the service manual
read the book on ABS and on wiring.

Dec 27, 2016 | Isuzu Cars & Trucks

4 Answers

Caliper won't release pressure from the brake caliper rotors

You can release the pressure from the caliper by using the bleeder valve, but it is not likely to be the issue, if the piston in the caliper is not centered correctly or is over extended then it is physically stuck. The cylinder and piston in the caliper might need to be replaced if they are scored or damaged.

Jun 04, 2016 | 1995 Jeep Wrangler

2 Answers


Kim, CODE U1418 The ABS Module sends an implausible distance signal over the CAN C Bus circuit to the PCM
  • PCM.
I recommend you take it in to reputable shop.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Feb 29, 2016 | 2006 Jeep Liberty Sport

1 Answer

How do I reset the time?

How to Configure Your Omron HJ-303 Pedometer
When your pedometer first comes out of the box, you'll need to configure it. When youchange the battery, you'll have to reset the time on your pedometer, but the ...

[PDF]Getting Started: Setting Up Your Pedometer

Woods Hole Oceanographic Institutionyour pedometer and walk your way to better health. Pedometer Setup ... down theRESET button. Additional ... you'll track steps, time, and miles throughout your daily routine. And, in ... Do the math: 20 divided by the number of steps equals.

How to Reset an Omron Walking Style Pedometer ... > Sports and Fitness
Oct 28, 2015 - Your Omron pedometer is a fitness accessory used to provide a great amount of ... session, including steps taken, time walked, distance traveled and calories burned. ... Do not use the end of a pencil to perform a system reset.

Dec 14, 2015 | Exercise & Fitness

1 Answer

I have a code u1418 implausible right wheel distance signal received (2oo8 jeep compass)

did you read the fsm on this,


not sure which book is best,ask jeep

the correct book walks you through all steps.

seems its abs (distances calce errors)
or the sensor is bad or dirty or loose or damaged
looking at it can do WONDerS

might even be bad brakes there
why not get the brakes checked by a real shop
ASE shops rule
ABS NEEDs good brakes FIRST.
1 case in point a grabbing brake, or other odd behaviour)
ever google search seems not
one guy had bad wheel bearing
a good shop (why not use one) would check that corner 100% bearing, shocks, sensor, brakes
and tie rods, (all means, ALL)
if tire hops moving and braking abs will be upset. ABS is not genius level yet.

all it knows is the sensors read odd.!!!!
and even compares them to others and true veh.speed
why not get a real mech, in the loop
it can also be network errors on the can buss network, that means using a REAL scan tool.
or you miss ALL THAT. (id bet no net error here)

the ABS sees odd readings right side sensor RF and RR
try to think like a dumbb computer (no joke)
if it sees one sensor , different and not braking and not turning
or one locks up, or varies. oddly braking.
oddly is he key word,
or IT tries to prevent a tire on right side from skidding but cant... (dah bad pads ,etc)
warped rotors??????
see how that works??
bad brakes
bad sensors (means wires there)
skipping tires
wobbling tires,rotors, bearing SHOT.
dead shocks (hopping like a bunny)
bad belongs.
sticky pads, burned up. or ???? not same match to others (do no mix brands up)
worn pads to metal back plates
overheated brakes
wobbing rotors.
(loose suspension parts right side)

do i need go gone on naming everything a spinning braking tire can do,wrong,, why? take a class on brakes then ABS,???
check for bad wires.
check brakes.
check bearings.
even loose lug nuts, really.
wrong size tire
bad tire, treads not same 4 corners.

or get car serviced ,that ASE guy knows what to do.

when abs fails , try to not think ABS
first (sure, wires)
try to think ABS saved my life by telling me
braking is bad before he human noticed it.!!!
it does this very well, this early warning
but is dumbb...
it can't know the wheel bearing is at
dangerous state of being../ just odd data, it sees.
(funny "odd" tone wheel, data from the sensors)
see choppy data... confusing to the non AI brain
it's not 2050 year.?

i did not list all possible points of failure
its too huge.
(ok pinched brake line)
get car serviced, why not?

or caliper slider pins sticking.... oops...

Jul 02, 2014 | 2008 Jeep Compass

1 Answer



-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router and repeat the same steps.


configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username (email address format) and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

if you are still having trouble configuring your device, try to call supportrix

Jul 10, 2008 | Edimax BR-6104K Router (br6104k)

Not finding what you are looking for?
Stairmaster Stepmill 7000 Pt Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stairmaster Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

918 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers


Level 3 Expert

5687 Answers

Are you a Stairmaster Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides