Question about Televison & Video

1 Answer

How do i fix my sharp aquos model LC-46D64U serial # 801811005

I plug it in, the power and ocp leds both blink together, the ocp stops, and power blinks a second time, and this keeps repeting, and there's no picture or sound. i read about holding the ch down and volume up at the same time while pluging it in, and all i get then is a solid green power led but still nothing on the screen, i need help !

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,619 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Posted on May 08, 2014

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Sharp LCD LC-46D64U

Try resetting the TV. Here's how to do it - Unplug the TV's power cable. Keep the Channel Down and Volume Up buttons on the TV pressed and plug the power cable back into the outlet. You will hear a click when you plug it back in if the reset is successful. Hopefully this should restore your video and audio.

Posted on Feb 06, 2008

  • 58 Answers

SOURCE: sharp lc-46d64u broken screens

if the screen is broke its not worth the repair

Posted on Dec 08, 2008

  • 257 Answers

SOURCE: can not power it on, the power LED keeps blinking.

Most likely, the power board was defective. You need to replace it.

Posted on Aug 18, 2009

satavlad
  • 405 Answers

SOURCE: Sharp AQUOS LC-46D85U green LEDs blinking, no picture, no sound

Sharp warranty is the way to go.

Posted on Oct 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a sharp aquos lc-c4677un its not turning on at all now. When I push the power botton on the tv, the power light turns on and about 2-3sec the power and opc light start to blink and thats about it.


How are the power and opc lights blinking? Do they blink simultaneously or does one blink then the other? How many time do they blink per second? Also have you had it fixed yet? and if so what was done? I had a similar problem with my set.

Aug 06, 2011 | Sharp AQUOS LC-C4654U 46" LCD TV

1 Answer

Sharp AQUOS LC-42D85U tvgos does not work and hasn't worked for several months. What is the problem?


What is ur tv problem?No tv power LED light incation all or power LED light indication an OPC LED lights indication flashing togethers?Tries tv unplug,replug it back like about an hour later,for the tv to do a whole resetting.Tv might work again.Tv still have no pwer all?Yes.The tv power supply board it is dead,that the board where the power a/c cord plug into it.If the tv have both power LED and OPC LEDS lights blinks together.The tv main board Tuner signal board it is the cause and the problems it is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board or a main Tuner signal board for the replacement.

Jul 03, 2011 | Sharp AQUOS LC-42D85U 42 in. LCD TV

1 Answer

Need details of sharp tv


Get the correct model number first and download the user's manual from Sharp. I think you meant LC-46D64U.

Apr 11, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

Sharp lc-46d64u blinking codes. power blinks 3 times and opc blinks once.


Very common in Sharp,tries unplug,replug back in,tries again off/on couple times,still happen blinks than ur main video board it dead.

Nov 05, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Can not power it on, the power LED keeps blinking.


Most likely, the power board was defective. You need to replace it.

Aug 18, 2009 | Sharp LC-46D64U 46 in. LCD HDTV

1 Answer

Sharp lc-46d64u broken screens


if the screen is broke its not worth the repair

Dec 07, 2008 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

4 Answers

Sharp aquos


you can try resetting the tv by
1. unplugging it
2. pressing channel down and volume up buttons at the same time while plugging tv back in
3. if you here a click, the tv has been reset

May 12, 2008 | Sharp LC-46D64U 46 in. LCD HDTV

1 Answer

Lc-46d64u


How many times per second does the POWER led blink? (dont worry about the OPC).

1x per second (constant, steady blink) = bad inverter/lamps
2x per second = bad power supply
3x per second = bad main board

There isnt really anything you can do to fix it yourself, youd have to call Sharp to locate a local service center.

Mar 23, 2008 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

3 Answers

Sharp Aquos TV


Hi,
The tv wont turn on ... the gren power display keeps blinking and won't turn on...
What can I do? Thank-You! KarL

Feb 24, 2008 | Sharp LC-46D64U 46 in. LCD HDTV

1 Answer

Sharp LCD LC-46D64U


Try resetting the TV. Here's how to do it - Unplug the TV's power cable. Keep the Channel Down and Volume Up buttons on the TV pressed and plug the power cable back into the outlet. You will hear a click when you plug it back in if the reset is successful. Hopefully this should restore your video and audio.

Dec 25, 2007 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...