Question about Samsung LN32B360 32 in. LCD HDTV

1 Answer

What is the rating of the NTC Power Thermistor Capacitor (SCK 056) located in slot NT 811S of the upper left hand board. (Samsung TV model LN32B360?

Posted by Anonymous on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 20,132 Answers

5 Ohms when cold. Less than 1 Ohm when hot.

Posted on Jun 22, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gsalmen
  • 77 Answers

SOURCE: T.V DOES NOT WANT TO POWER ON

The power supply is known to go bad. I would see if it is working. A servicer in your area should be able to check this out. These are known for bad caps.

Posted on Jul 15, 2009

  • 743 Answers

SOURCE: I amd wondering on the Power Board #BN96-03775A on

Usually if they will plug in it is right, but if you have one of those that fit all, then I wouldn't be afraid to start with the first since if it doesn't work, you can always try the second. One may give a better picture than the other, that you might compare with.

Posted on Oct 28, 2009

darkdragons
  • 835 Answers

SOURCE: What are the best picture settings for a ln32b360

Well, picture settings for this tv, is basically personal preference, size of the room, distance you will be from the tv, ect. even the lighting in the room. Changing any of these factors can change what resolution you wanna put your tv into. As well wide or full screen is a personal preference. The best thing to do would be simply play with the display settings and see what works the best for you. Telling you exact settings may not work for you.

Posted on Nov 04, 2009

  • 610 Answers

SOURCE: need comcast remote code for samsung LN32B360

try calling 1-800-samsung.

Posted on Nov 25, 2009

  • 927 Answers

SOURCE: Which Replacement Power Board for LNT4665F Samsung LCD TV?

Howdy,
It would be a lot cheaper if you just replace the two caps that have gone bad. Just get a cheap solder pencil from the store and about an inch of solder and you are in business.
The Power Supply Board is the center Board (towards left) after you remove the back off the TV. Remove Board from TV with the 6-7 screws. Replace capacitors CM852 & CM853; 2200ufd 25volts.

Thaks for using FIXYA, BIG IRISH.

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Burning smell


Need the board locations of the parts your needing the info on. Such as cxxx or Rxxx stamped on the PC Board.

Mar 05, 2008 | Zenith H27F36DT 27" TV

1 Answer

Samsung Model LN32B360C5DXZA not receiving power.


Power converter board is probably blown.
Take it to a repair shop.

Apr 06, 2014 | Samsung LN32B360 32 in. LCD HDTV

2 Answers

Samsung Model LN32B360C5DXZA TV will not power on. Dead.


Check and replace damaged component/s at its main power regulator board, or, replace the board as card basis. If you wish to get more details, check this link.http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sep 22, 2013 | Samsung LN32B360 32 in. LCD HDTV

1 Answer

S/N AZA43CRSA16199J MODEL LN32B360C5D BUY IN 2009 POWER GET OFF SCREEN GET BLACK NO SOUND


Thanks for stopping by.

Typically, for the symptoms you have described - the power supply board likely has failed capacitor(s). If you were to remove the back of the set - you'd probably notice the power capacitors leaking or bulging.

For your Samsung LN32B360C5D CLICK HERE to see your board/replacement.

The big yellow capacitor in the middle is the likely culprit.
While you have it open - check the fuse near the power plug as well.


9_18_2011_5_39_16_pm.jpg
This is not something that will correct with a reset or button press - it will require repair.
If you have it to a repair shop - expect a $75 component repair charge. If the board cannot be repaired - the board itself is $89-$135 plus 1 hour shop labor to replace.


Thanks!!

Sep 18, 2011 | Samsung LN32B360 32 in. LCD HDTV

2 Answers

TV was making a clicking sound like a relay was trying to click open everytime you would turn it on. It would take up to several minutes for the tv to actually turn on. Now it won't even turn on. And the...


I had the same problem and finally figured out what was wrong and fixed it. If the TV is making clicking sound, 95% the problem is the main power supply board (PSB). The easy fix is to replace the new PSB which can be ordered online from $80 to $100 (model # PSPF 501A01A), or you can buy it straight from Samsung for $129.95. If you are a little handy in electronic, knowing how to solder and troubleshoot electronic components, you can fixed it for a little cost around $30. It was $1.77+ shipping for my case, I guess I'm lucky.

I have read and research a lot of info on the internet forums and here is what I learned about this clicking problem. The clicking noise you hear when turning on the TV is the sound coming from the switching relay. It's the power protection circuit which senses a short somewhere in the system and trying to shut it down. The short can also be from other boards connecting to the main PSB, or within the PSB itself. Of course I'm not certified or TV repair man, but if it is something minor and can be fixed by a handyman, I'll try it first. If it is beyond the basic, a major problem or you have no idea about electronic at all, have it serviced at a certified TV repair shop.

For my case, here are the steps I took to troubleshoot it:

1. Unplug all 4 connectors on the main PSB. Use a Voltmeter to check the voltage on pin 10 of CN804-1 (read the print on the board where it said SB 5V), this is the standby 5V supply. If the voltage is low, not present, or spike on and off, the issue is the power supply. If the TV is totally dead after the clicking stage, this stand by voltage should be 0V or spiking up and down. For my case, the Power thermistor is dead.

2. Visual Inspection: Visually inspect the PSB for any damaged component, especially all the ESR capacitors. Look in the back of the PSB to see if all the solder traces are ok, no crack or black stain causing from burned components. If you find any damaged component, replace it.

3. If everything look good on the main PSB, then the problem is likely on somewhere else, may be the Y-board. At this stage, you should consult with a certified TV repair person.

Here is what happened to me:

Symptom:
-First stage: When turn on the TV, it was clicking for less than one minute then back to normal.
-Second stage: After 3 days, the clicking last longer to about 4 minutes then back to normal.
-Third stage: After 1 week, the power button's blue light is flashing when the TV is off. But "might" turn on after clicking for about 8-10 minutes.
-Fourth stage: No flashing blue light, no response. The TV is totally DEAD!

Solution:
-Visually inspected the PSB. Everything look good except I found an NTC Power Thermistor (next to the switching relay) was bad. It was burned and opened. The number on it is SCK 206.

-I checked the stand by voltage at pin 10 of CN804-1. I have no voltage there but a spiked voltage up and down on the meter (no reading). Definitely the problem is the PSB.

-All solder traces and capacitors look good, so I decided to replace the burned power thermistor. The big problem is to find a new part online because there is no match for SCK 206, SCK 206 is not the part number and no one on the online store knows what substitute part for SCK 206.

After a few days searching for the part number, I was lucky to talked to a technical support from a Amethem company which designed the NTC power thermistor and he quickly recognized the Samsung SCK 206. He gave me a substitute part number of a much better quality power thermistor. The part number is SL227R010 (7Ohms, 10A).

When you have the correct part number, you can find it everywhere. The cost was $1.77 each, and I got it from Digikey.com

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&KeyWords=sl227r010&x=0&y=0

I solder the new component back to the main PSB. My TV came back to life. Hope it help for your case.

_1325.jpg

_1323.jpg

_1324.jpg

Jan 15, 2011 | Samsung HP-S5053 Television

1 Answer

I have a samsung tv hp-s5053, when you push the power button, you hear it click then the power button flashes blue 3-4 times ans it sound like it cuts off, but nothing ever comes on the screen...Does...


I had the same problem and finally figured out what was wrong and fixed it. If the TV is making clicking sound, 95% the problem is the main power supply board (PSB). The easy fix is to replace the new PSB which can be ordered online from $80 to $100 (model # PSPF 501A01A), or you can buy it straight from Samsung for $129.95. If you are a little handy in electronic, knowing how to solder and troubleshoot electronic components, you can fixed it for a little cost around $30. It was $1.77+ shipping for my case, I guess I'm lucky.

I have read and research a lot of info on the internet forums and here is what I learned about this clicking problem. The clicking noise you hear when turning on the TV is the sound coming from the switching relay. It's the power protection circuit which senses a short somewhere in the system and trying to shut it down. The short can also be from other boards connecting to the main PSB, or within the PSB itself. Of course I'm not certified or TV repair man, but if it is something minor and can be fixed by a handyman, I'll try it first. If it is beyond the basic, a major problem or you have no idea about electronic at all, have it serviced at a certified TV repair shop.

For my case, here are the steps I took to troubleshoot it:

1. Unplug all 4 connectors on the main PSB. Use a Voltmeter to check the voltage on pin 10 of CN804-1 (read the print on the board where it said SB 5V), this is the standby 5V supply. If the voltage is low, not present, or spike on and off, the issue is the power supply. If the TV is totally dead after the clicking stage, this stand by voltage should be 0V or spiking up and down. For my case, the Power thermistor is dead.

2. Visual Inspection: Visually inspect the PSB for any damaged component, especially all the ESR capacitors. Look in the back of the PSB to see if all the solder traces are ok, no crack or black stain causing from burned components. If you find any damaged component, replace it.

3. If everything look good on the main PSB, then the problem is likely on somewhere else, may be the Y-board. At this stage, you should consult with a certified TV repair person.

Here is what happened to me:

Symptom:
-First stage: When turn on the TV, it was clicking for less than one minute then back to normal.
-Second stage: After 3 days, the clicking last longer to about 4 minutes then back to normal.
-Third stage: After 1 week, the power button's blue light is flashing when the TV is off. But "might" turn on after clicking for about 8-10 minutes.
-Fourth stage: No flashing blue light, no response. The TV is totally DEAD!

Solution:
-Visually inspected the PSB. Everything look good except I found an NTC Power Thermistor (next to the switching relay) was bad. It was burned and opened. The number on it is SCK 206.

-I checked the stand by voltage at pin 10 of CN804-1. I have no voltage there but a spiked voltage up and down on the meter (no reading). Definitely the problem is the PSB.

-All solder traces and capacitors look good, so I decided to replace the burned power thermistor. The big problem is to find a new part online because there is no match for SCK 206, SCK 206 is not the part number and no one on the online store knows what substitute part for SCK 206.

After a few days searching for the part number, I was lucky to talked to a technical support from a Amethem company which designed the NTC power thermistor and he quickly recognized the Samsung SCK 206. He gave me a substitute part number of a much better quality power thermistor. The part number is SL227R010 (7Ohms, 10A).

When you have the correct part number, you can find it everywhere. The cost was $1.77 each, and I got it from Digikey.com

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&KeyWords=sl227r010&x=0&y=0

I solder the new component back to the main PSB. My TV came back to life. Hope it help for your case.

patpsc_0.jpg

patpsc_1.jpg

patpsc_2.jpg

Dec 03, 2010 | Samsung HP-S5053 Television

2 Answers

Samsung LN32B360 - had the TV for 9 months and when it is turned on the sound continues, but the picture pops on and off continually about every 20 seconds or so. This started about a month ago.


It can be the backlights inverter board or the power supply section that supplys the power to the inverter board is bad. I hope it is still under warranty. You can how much some of the parts cost here: http://www.shopjimmy.com/catalogsearch/result/?q=Samsung+LN32B360+
Please post back what you find.

Dec 09, 2009 | Samsung LN32B360 32 in. LCD HDTV

1 Answer

NTC cover message after replacing fuse in my whirlpool microwave MH1170xsb


The "negative temperature coeffecient" (NTC) thermistor was left unplugged after reassembly or it is defective.

It is the hood thermistor, and should be plugged into connector P4 on the circuit board.

I think it should be at the bottom of the board, on a little tongue-like protrusion, as shown in the attached photo.

There should be a "mini-manual" (tech sheet) hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, testing, and locating components.
At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

If you don't find yours, or if you want to look at it without disassembling the oven, you can download it here (just enter your model number).

You can also find helpful exploded view diagrams and order parts by entering your full model number from the tag on the oven here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

818944a.jpg

Aug 16, 2009 | Whirlpool MH1170XS Microwave Oven

Not finding what you are looking for?
Samsung LN32B360 32 in. LCD HDTV Logo

Related Topics:

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...