Question about Electric 3CH Mini Sport RTF RC Helicopter 735-61C

1 Answer

Hak 735 helicopter

Hey, my helicopter is not working. new batteries in the transmitter, heli battery is charged... the blue light of the transmitter is just flashing but it wont go into the eternal bright. whats wrong?? seams that that the decoding process is not working?!?!?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 100 Answers

Usually synching requires one device started before the other, meaning that you may want to power on the transmitter, then turn on the heli and try the heli first, then the transmitter second if that doesn't work. Otherwise there's usually a small button that is pressed to get the two devices talking to each other.

Posted on May 08, 2014

  • john mill
    john mill May 08, 2014

    thxs mike, i did what u said.. still not running.

  • john mill
    john mill May 08, 2014

    theres no also no "special button" ;( ;(

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is that not working?


The antenna in the helicopter might be broken

May 08, 2014 | Electric 3CH Mini Sport RTF RC Helicopter...

1 Answer

How do you turn on an HAK 311


On the copter right above the charging hole, there is a little switch. Left is off, right is on.

My copter has the problem that the remote doesn't work, turning it on does nothing, and connecting it to the copter only makes the light on the remote flash red.

HAK 31 is a piece of junk.

Feb 09, 2014 | Electric 3CH Mini Sport RTF RC Helicopter...

1 Answer

My v913 does not respond to left turns. mode 2


i think it has something to do with the signal to heli from transmitter

Jan 15, 2014 | WL Toys WL V913 Sky Dancer 4CH FP...

2 Answers

My S107G is fully charged, I turn on and off transmitter on different frequencies, turn the heli on and off according to my instruction manuel, but the lights on the heli are on,the circuit board red led...


Hi,
I have similar problem with my LS-208 heli.
Helicopter leds are blinking red/green, front white led is on, and tail leds are blinking too.
Remote controller red led is on as should be but helicopter doesn't respond to controller at all.
I followed instructions above with no success.
Anyone has a suggestion?
Regards, Yaron.

Jun 12, 2012 | SYMA Toys industrial New Syma S107 Radio...

2 Answers

My helicopter 9053 will not connect to my controller


The receiver is not binding to the transmitter. Make sure the batteries are in good shape in transmitter. I'm assuming it's a 2.4GHz radio frequency.
When you are about to fly, turn transmitter on first after 4-5 seconds turn
heli on or plug battery in on heli. In the manual there should be a page describing radio binding. It will describe on what gimbles to move and
in certain sequences to complete the process. When the light on transmitter stops flashing means the binding process is complete.
Hope this helps.

Dec 15, 2011 | xheli 9053 Outdoor Volitation Metal...

1 Answer

T2er no information on how to charge batteries


YOU SHOULD HAVE A CHARGING UNIT WITH 2 LEADS 1 IS A JACKPIN THAT PLUGS INTO THE TRANSMITTER THE OTHER LEAD HAS A CONNECTOR SIMMILAR TO THE BATT TO RECEIVER IN THE HELI IF YOU HAVE A REMOTE CHARGING SOCKET IN THE HELI JUST PLUG IT IN. IF NOT DISSCONNECT THE BATT FROM THE RECIEVER AND CONNECT DIRECT TO THE BATTERY

Aug 18, 2011 | Futaba 6CH Digital Transmitter and...

1 Answer

Just bought an S107G. I have brand new batteries in the controller, and the heli is fully charged. The light on this controller when turned on is solid red at all times (should be green right?) The...


Do the lights on the heli come on?

Normal start-up would be:
Turn helicopter on. Flashing light in nose should come on, as well as another blinking light (sometimes towards the rear, sometimes in the "cockpit" area) the helicopter MUST then be placed on a level stable surface until the 'other' light stops blinking, usually a couple/few seconds. This is the gyroscopes synching up and determining the "level" head orientation they will be maintaining. Then power the controller on. Making sure you're not covering the front of the controller with your hands, (the IR signals come out the front like a TV remote) push the throttle control (left joystick) up until the blades move. This what the horribly translated instructions mean by setting the helicopter and controller together.
Don't charge with the controller. It kills your controller's batteries, (which will last nearly forever if you don't use them as your heli's charger) and seems to make the birds act weird. Use the USB charger and a fully powered USB port (back of your desktop, not the front) and go by the light on the charger not an arbitrary time. Plug in charger NOT connected to heli. Look at the light. That is what the light will look like when unit is fully charged. Make sure heli is off. Plug into charger. Charge until light is fully on. If you unplug heli and the light gets brighter, it's not charged fully. A weak USB port (on a laptop or the front side data port on most desktops) may take several hours to achieve full charge. Always cool 10 mins after charging AND 10 mins after flying. Never drain fully, it will kill the Li/Po battery. Land and power off as soon as you can't maintain altitude.
If it is really charged, and you turn it on and nothing happens... no lights nothing. Then it's defective/toast. Return for refund.
These SYMA helis are awesome, and HANDS DOWN the best on the market... but they can be picky/tricky on how they are treated.

Please let me know if this helps.
PvT

Jul 27, 2011 | SYMA Toys industrial New Syma S107 Mini...

1 Answer

Need charging instructions for Air Hogs Havoc heli. Is remote control switch to be turned on during charging? What position is channel switch in? Is Heli on/off switch set to charge? I have no...


1.Take out charging wires. 2.turn off your heli and insert charging socket into your heli's socket. 3.the charging green light will light up while charging. 4.charging complete, the green light will turn off. 5.pull out the wires and you are ready to fly. Let the heli's battery cool down for approx. 15 minutes before charging.

Feb 19, 2010 | Spinmaster Air Hogs Battling Havoc R/C...

Not finding what you are looking for?
Electric 3CH Mini Sport RTF RC Helicopter 735-61C Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Toys Experts

Lawrence Oravetz

Level 3 Expert

9587 Answers

Mike Stager
Mike Stager

Level 2 Expert

100 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you an Electric Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...